Comparison of Unbound Granular Materials’ Resilient Moduli Determined by Cyclic Triaxial Test and Innovative FWD Device
Open Access
- 2 June 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (11) , 5673
Abstract
In addition to the conventional laboratory tests of input materials and construction mixtures, the technically correct design of pavement structure involves more frequent functional tests of the input materials and mixtures. Our study summarizes findings from a long-term monitoring of pavement on selected road sections with lower traffic intensity. The research involved the comparison of resilient moduli as a design parameter of unbound pavement base layers’ unbound granular materials (UGMs), determined in a laboratory by a test device for a cyclical triaxial test and in situ by impact load test using a falling weight deflectometer (FWD). In particular, the resilient moduli determined in the laboratory by a cyclic triaxial test (Mr,CTT) were compared with the real values of resilient moduli measured by FWD (Mr,FWD). A new, unique, and innovative FWD device was used to determine the Mr,FWD of the UGMs. The innovation lay in the dual-axis deflection measurement—measurement performed not just in the axis parallel to the road, but also in the axis in the transversal direction. It was found that, especially on roads with lower traffic load, such dual-axis (spatial) determination of Mr,FWD moduli was of great importance because it often allowed the identification of local pavement sections with low bearing capacities, especially at the edges, which have a significantly lower value of Mr,FWD.Keywords
Funding Information
- Technology Agency of the Czech Republic (CK01000158, CK03000169, TH04030342)
- “Use of higher amounts of reclaimed material in asphalt mixtures with PmB bitumen” (CK01000158, CK03000169, TH04030342)
- Technologická Agentura České Republiky (CK01000158, CK03000169, TH04030342)
- Technologická Agentura České Republiky (CK01000158, CK03000169, TH04030342)
This publication has 16 references indexed in Scilit:
- Utilisation of the deflectograph data to evaluate pavement structural condition of the highway networkRoad Materials and Pavement Design, 2015
- Pavement construction using road waste building material – from a model to realityRoad Materials and Pavement Design, 2015
- Evaluation of Resilient Modulus of Subgrade and Base Materials in Indiana and Its Implementation in MEPDGThe Scientific World Journal, 2014
- Influence of laboratory compaction method on mechanical and hydraulic characteristics of unbound granular base materialsRoad Materials and Pavement Design, 2013
- Investigation of a pavement structural behaviour during spring thaw using falling weight deflectometerRoad Materials and Pavement Design, 2013
- In-place evaluation of a limestone base course modulus, using a van-integrated falling weight deflectometer (FWD) and the GeoGauge (SSG)Road Materials and Pavement Design, 2012
- Backcalculated and Laboratory-Measured Resilient Modulus ValuesTransportation Research Record: Journal of the Transportation Research Board, 2009
- Falling Weight Deflectometer FleetRoad Materials and Pavement Design, 2004
- Evaluation of FWD Data for Determination of Layer Moduli of PavementsJournal of Materials in Civil Engineering, 2003
- Falling Weight Deflectometer for Estimating Subgrade Elastic ModuliJournal of Transportation Engineering, 2003