Development of TiB 2 -GNP reinforced Al6061 nano-hybrid composites with enhanced wear and mechanical properties
- 14 November 2025
- journal article
- Published by SAGE Publications in Journal of Composite Materials
Abstract
In this study, nano-hybrid composite materials were produced via powder metallurgy (PM) by adding TiB 2 and graphene nanoplatelets (GNPs) to Al6061 alloy, known for its high ductility, corrosion resistance, and weldability. Sub-150 µm Al6061 powder was used as the matrix, while reinforcement elements included sub-5 µm TiB 2 and 5 nm thick, 18 µm diameter GNPs. Six different materials were fabricated: pure Al6061, Al6061 + 10% TiB 2 , and Al6061 + 10% TiB 2 with 0.25%, 0.5%, 1%, and 2% GNP additions. The powder mixtures were first dispersed in ethanol and ultrasonically agitated at 53 kHz for 60 min, followed by magnetic stirring at 580 rpm. Ethanol was removed via vacuum drying, and the dried powders were mixed in a 3D mixer for 30 min with a 1:5 powder-to-ball ratio. Cold pressing was performed at 50 MPa, followed by sintering at 550°C for 30 min and hot pressing at 200 MPa. After cooling to room temperature, T6 heat treatment was applied. Microstructure, density, hardness, tensile strength, and wear properties were examined. Increasing the reinforcement ratio reduced density. While hardness decreased with higher GNP content, tensile strength improved. Wear tests showed that TiB 2 and GNP additions significantly reduced volume loss. The lowest wear was observed in the 10% TiB 2 + 1% GNP sample. Due to the self-lubricating effect of GNPs, the coefficient of friction also decreased, with the lowest value recorded for the 1% GNP-reinforced composite.Keywords
This publication has 71 references indexed in Scilit:
- Enhanced structural integrity and tribological performance of Al6061–Al6082 alloys reinforced with TiB2 and Al2O3 via friction stir weldingThe International Journal of Advanced Manufacturing Technology, 2025
- Functionally graded A6061-TiB2 in-situ nano-composites by high shear dispersion mixing assisted centrifugal casting techniqueJournal of Materials Science, 2025
- Thermo-Mechanical Behaviour of Cold Metal Transfer-Welded Aluminium Alloy Composite Reinforced with Hard Ceramic TiB2 and Rare Earth La2O3 ParticlesArabian Journal for Science and Engineering, 2025
- Investigation on the Mechanical Property and Wear Characteristics of Aluminium-6061 Hybrid Composite Reinforced with Graphene-Nanoplatelets by Stir CastingJournal of The Institution of Engineers (India): Series C, 2024
- Multi-criteria Optimization for Wear and Friction Properties of Self-Lubricating Al6082-T6/GNP/TiB2 Hybrid CompositesJournal of The Institution of Engineers (India): Series D, 2024
- Tribological properties of Al-GNP composites at elevated temperatureFriction, 2024
- Study of Structural and Mechanical Properties of Al/Nano-Al2O3 Metal Matrix Nanocomposite Fabricated by Powder Metallurgy MethodTransactions of the Indian Institute of Metals, 2020
- Tribological Behavior of Solid-State Processed Al-1100/GNP Surface NanocompositesJournal of Materials Engineering and Performance, 2018
- An Investigation on the Sinterability and the Compaction Behavior of Aluminum/Graphene Nanoplatelets (GNPs) Prepared by Powder MetallurgyJournal of Materials Engineering and Performance, 2017
- Wear of Advanced Materials2013