On the refinement of carbide precipitates by cryotreatment in AISI D2 steel
- 15 January 2009
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 89 (1) , 55-76
Abstract
Refinement of carbide particles by cryotreatment is often proposed as a major factor for the improvement of wear resistance in tool steels. However, this proposition is not substantiated by experimental evidence. This has been examined in this report by (i) detailed micro-structural analyses of the nature, volume fraction, size, population density and distribution of carbide particles, (ii) XRD and EDX micro-analysis on the bulk samples and electrochemically extracted carbides, and (iii) measurement of hardness and wear rate of a series of differently cryotreated AISI D2 steel. The results conclusively establish that (i) cryotreatment, in comparison to conventional treatment, induces precipitation of finer carbides with higher volume fraction and more uniform distribution, and (ii) population density and the size of secondary carbide particles significantly increases with holding time up to a critical duration at 77 K in cryotreatment. The latter observation indicates the pioneering direction towards optimization of cryotreatment design for techno-economic benefit.Keywords
This publication has 22 references indexed in Scilit:
- Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 SteelMaterials and Manufacturing Processes, 2007
- Optimising nano-carbide precipitation in tool steelsMaterials Science and Engineering: A, 2007
- Effect of cryogenic treatment on the matrix structure and abrasion resistance of white cast iron subjected to destabilization treatmentWear, 2006
- Performance of cryogenically treated HSS toolsWear, 2006
- Influence of deep-cryogenic treatment on wear resistance of vacuum heat-treated HSSVacuum, 2006
- CRYOPROCESSING OF MATERIALS: A REVIEW OF CURRENT STATUSMaterials and Manufacturing Processes, 2002
- Effect of deep cryogenic treatment on the mechanical properties of tool steelsJournal of Materials Processing Technology, 2001
- Cryogenic treatment to augment wear resistance of tool and die steelsCryogenics, 2001
- Role of Eta-carbide Precipitations in the Wear Resistance Improvements of Fe-12Cr-Mo-V-1.4C Tool Steel by Cryogenic Treatment.ISIJ International, 1994
- Cryogenic treatment of metals to improve wear resistanceCryogenics, 1982