Characterizing Depth of Defects with Low Size/Depth Aspect Ratio and Low Thermal Reflection by Using Pulsed IR Thermography
Open Access
Abstract
This study is focused on the quantitative estimation of defect depth by applying pulsed thermal nondestructive testing. The majority of known defect characterization techniques are based on 1D heat conduction solutions, thus being inappropriate for evaluating defects with low aspect ratios. A novel method for estimating defect depth is proposed by taking into account the phenomenon of 3D heat diffusion, finite lateral size of defects and the thermal reflection coefficient at the boundary between a host material and defects. The method is based on the combination of a known analytical model and a non-linear fitting (NLF) procedure. The algorithm was verified both numerically and experimentally on 3D-printed polylactic acid plastic samples. The accuracy of depth prediction using the proposed method was compared with the reference characterization technique based on thermographic signal reconstruction to demonstrate the efficiency of the proposed NLF method.Keywords
Funding Information
- European Regional Development Fund (CZ.02.1.01/0.0/0.0/18_069/0010018)
- Russian Scientific Foundation (17-19-01047p)
This publication has 29 references indexed in Scilit:
- Infrared thermography for civil structural assessment: demonstrations with laboratory and field studiesJournal of Civil Structural Health Monitoring, 2016
- Optically and non-optically excited thermography for composites: A reviewInfrared Physics & Technology, 2016
- A review of non-destructive testing methods of composite materialsProcedia Structural Integrity, 2016
- Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonicsComposite Structures, 2015
- Determination of the applicability and limits of void and delamination detection in concrete structures using infrared thermographyNDT & E International, 2015
- Non-destructive testing of wind turbine blades using an infrared thermography: A review2013
- Qualitative and quantitative assessment of aerospace structures by pulsed thermographyNondestructive Testing and Evaluation, 2007
- Aircraft composites assessment by means of transient thermal NDTProgress in Aerospace Sciences, 2004
- Active IR-applications in civil engineeringInfrared Physics & Technology, 2002
- Thermographic inspection of cracked solar cells2002