Control strategy for a buck-boost type direct interface converter using an indirect matrix converter with an active snubber
Authors:
- 1 February 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1684-1691
Abstract
This paper proposes a novel control method for an interface converter that is using an indirect matrix converter (IMC) with a DC power supply. The proposed converter is constructed based on an indirect matrix converter and a converter that combined the function of a boost type converter and a step-down type converter. The proposed converter connects an active snubber to the DC link part of IMC along with a boost type converter. The voltage transfer ratio from the AC power sources to the load can be improved by this active snubber. In addition, the proposed control method able to control the power distribution ratio and the output voltage at a same time. The basic operation of the proposed method has confirmed by simulation and experimental results.Keywords
This publication has 10 references indexed in Scilit:
- The essence of three-phase AC/AC converter systems2008
- A novel control strategy for a combined system using both matrix converter and inverter without interconnection reactors2008 IEEE Power Electronics Specialists Conference, 2008
- Realization of High Efficiency AC link Converter System based on AC/AC Direct Conversion Techniques with RB-IGBT2006
- Active Compensation of Unbalanced Supply Voltage for Two-Stage Direct Power Converters Using the Clamp Capacitor2006
- A utility power supply based on a four-output leg matrix converter2005
- Investigation of dual-bridge matrix converter operating under unbalanced source voltages2004
- A Control Method for the Matrix Converter Based on Virtual AC/DC/AC Conversion Using Carrier Comparison MethodIEEJ Transactions on Industry Applications, 2004
- Novel three-phase AC-DC-AC sparse matrix converter2003
- Matrix converters: a technology reviewIEEE Transactions on Industrial Electronics, 2002
- PWM-rectifier/voltage-source inverter without DC link components for induction motor driveIEE Proceedings B Electric Power Applications, 1993