Series Clutched Actuation for Collision-Tolerant High-Speed Robots
- 23 April 2024
- journal article
- research article
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 16 (12) , 1-15
Abstract
Collisions at high-speed can severely damage robots with non-backdrivable drivetrains. Adding an overload clutch in series can improve the robot’s collision tolerance without compromising its high dynamic performance. This paper aims at determining the speed above which overload clutches are required in a two-link manipulator arm. Furthermore, the optimal clutch topology as function of the impact velocity is investigated. Third, it is evaluated if adding clutches can lower the impact force on the arm. Finally, the maximum speed is identified below which impact-aware robot control is possible. The latter requires that none of the clutches decouple during an intentional collision with the environment. These answers are obtained through collision simulations and experiments with a custom build two-link arm. It was found that adding a clutch reduces the torque experienced by the drivetrain by an order of magnitude and below the limit momentary peak torque of the strain wave gears that are used. Adding a clutch to the elbow joint of the two-link arm was effective in protecting the shoulder as well if the impact occurred at the tool center point. With respect to a rigid elbow joint, the clutched elbow joint reduced the collision force at the tool by only 8%. To demonstrate that the arm is impact-aware, a box of 8 kg is approached, impacted, and pushed at 1 m/s without decoupling a clutch, nor damaging the robot’s hardware.Keywords
Funding Information
- Fonds Wetenschappelijk Onderzoek (G0A9623N)
This publication has 19 references indexed in Scilit:
- Overload Clutch With Integrated Torque Sensing and Decoupling Detection for Collision Tolerant Hybrid High-Speed Industrial CobotsIEEE Robotics and Automation Letters, 2022
- Towards Safe Physical Human-Robot Interaction by Exploring the Rapid Stiffness Switching Feature of Discrete Variable Stiffness ActuationIEEE Robotics and Automation Letters, 2022
- On Inverse Inertia Matrix and Contact-Force Model for Robotic Manipulators at Normal ImpactsIEEE Robotics and Automation Letters, 2022
- Overload Clutch Design for Collision Tolerant High–Speed Industrial RobotsIEEE Robotics and Automation Letters, 2021
- Dynamics and Control of an Anthropomorphic Compliant Arm Equipped With Friction ClutchesIEEE/ASME Transactions on Mechatronics, 2015
- A Comparison of the Effectiveness of Design Approaches for Human-Friendly RobotsJournal of Mechanical Design, 2015
- Variable impedance actuators: A reviewRobotics and Autonomous Systems, 2013
- Collision Detection Algorithm to Distinguish Between Intended Contact and Unexpected CollisionAdvanced Robotics, 2012
- Performance Indices for Collaborative Serial Robots With Optimally Adjusted Series Clutch ActuatorsJournal of Mechanisms and Robotics, 2012
- Mathematical modeling of a robot collision with its environmentJournal of Robotic Systems, 1985