Mechanical performance and chloride ion penetration of polyolefin fiber reinforced concrete designed for shotcreting at marine environment
- 2 January 2020
- journal article
- research article
- Published by Taylor & Francis in Journal of Structural Integrity and Maintenance
- Vol. 5 (1) , 8-17
Abstract
This work investigates the mechanical performance and chloride ion penetration of base concrete for shotcrete that was reinforced with non-corroding polyolefin fibers for marine structure application. Test parameters included polyolefin fiber and conventional steel fiber, use of ground granulated blast furnace slag (GGBFS), and two different methods to evaluate chloride ion penetration property (ASTM C 1202 and NT-BUILD 492). Test results show that concrete containing polyolefin fiber had lower compressive strength, flexural strength, and toughness than those with steel fiber, but still met mechanical property criteria of shotcrete. While charge passed value of the concrete with polyolefin fiber was lower than that with steel fiber, the chloride ion diffusion coefficient of the concrete with polyolefin fiber was slightly higher than that with steel fiber. Concrete replaced with 40% GGBFS by mass of cement leaded to better mechanical performance and chloride ion penetration resistance than that without GGBFS regardless of both ASTM C 1202 and NT-Build 492 methods. Based on the test results, the use of polyolefin fibers has benefit as reinforcement of shotcrete used for marine structure application.Keywords
This publication has 13 references indexed in Scilit:
- Prediction of the Rupture of Circular Sections of Reinforced Concrete and Fiber Reinforced ConcreteInternational Journal of Concrete Structures and Materials, 2016
- Chloride Ion Penetration in RC and SFRC Precast Tunnel Lining SegmentsACI Materials Journal, 2014
- Application of high performance polypropylene fibers in concrete lining of water tunnelsMaterials & Design (1980-2015), 2014
- Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze–thaw cyclesConstruction and Building Materials, 2010
- Influence of polypropylene fiber geometry on plastic shrinkage cracking in concreteCement and Concrete Research, 2006
- Adhesion strength and shrinkage of shotcreteTunnelling and Underground Space Technology, 2005
- Comparative evaluation of steel mesh, steel fibre and high-performance polypropylene fibre reinforced shotcrete in panel testCement and Concrete Research, 2004
- Tension Stiffening and Cracking of Steel Fiber-Reinforced ConcreteJournal of Materials in Civil Engineering, 2003
- Stress–strain curves for steel-fiber reinforced concrete under compressionCement and Concrete Composites, 1999
- Effects of transition zone densification on fiber/cement paste bond strength improvementAdvanced Cement Based Materials, 1997