Feasibility Study for Installing Machine in Production Line to Avoid Particle Contamination Based on CFD Simulation
Open Access
- 1 October 2017
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 241 (1) , 012011
Abstract
Ventilation system inside production line for electronic component production needs to meet the factory standard. Because it can eliminate small particles which may cause of human or machine in production as well as it can distribute the circulating air temperature uniformly. CFD is used in this research in order to study the feasibility and plan for machine layout in production line before actual installation. The simulation shows the airflow in every area inside production line. From simulation with releasing the particles from human and machine is found that this ventilation system generates airflow that makes most particles float out of the machines and no particle downs to the conveyor, it results to contamination. In addition, the simulation also shows the range of 19-26 0 C air temperature that meets the factory standard. The results of this research are the parts of the data to renovate the production line to get more efficiency and proper on the production.Keywords
This publication has 8 references indexed in Scilit:
- Computational fluid dynamics study of human-induced wake and particle dispersion in indoor environmentIndoor and Built Environment, 2016
- Evaluation of clean air delivery rates and operating cost effectiveness for room air cleaner and ventilation system in a small lecture roomEnergy and Buildings, 2016
- Optimum airflow to reduce particle contamination inside welding automation machine of hard disk drive production lineInternational Journal of Precision Engineering and Manufacturing, 2015
- The influence of human physical activity and contaminated clothing type on particle resuspensionJournal of Environmental Radioactivity, 2014
- Investigation of particle transport in offices equipped with ceiling-mounted personalized ventilatorsBuilding and Environment, 2013
- Cfd analysis and airflow measurements to approach large industrial halls energy efficiency: A case study of a cardboard mill hallEnergy and Buildings, 2011
- Study on contamination control in a minienvironment inside clean room for yield enhancement based on particle concentration measurement and airflow CFD simulationBuilding and Environment, 2010
- Review of the shear-stress transport turbulence model experience from an industrial perspectiveInternational Journal of Computational Fluid Dynamics, 2009