Mechanical alloying of immiscible Cu70TM30 alloys (TM = Fe,Co)
Authors:
- 1 February 1995
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine Part B
- Vol. 71 (2) , 249-259
Abstract
Four series of copper-based alloys with compositions Cu70Co30, Cu70Fe30Cu70Co15Fe15 and Cu70(CoFe)30 were synthesized by mechanical alloying (MA). The interest in these materials is as parents of alloys which will show the giant magnet resistance (GMR) effect. The structural evolution was studied as a function of the MA time by means of Mössbauer spectroscopy, X-ray and neutron diffraction techniques and differential scanning calorimetry (DSC). In spite of the positive heat of mixing of the alloy constituents, the complete dissolution of the minority phases (iron and/or cobalt) into the copper f.c.c. lattice was observed for each specimen after 16 h of MA. This alloying was accompanied by changes in lattice parameter ─Δa 0/a 0─ of up to 0.5% with respect to pure copper. Analysis of the crystallization products arising from DSC treatments up to 600°C revealed a separation into copper f.c.c. and iron-based b.c.c. phases. In the case of the ternary Cu70(FeCo)30 alloys, the FeCo intermetallic compound was obtained by heating both alloys which originated as ternaries and also as pseudo-binaries based on copper plus the intermetallic phase. Mössbauer spectra of the annealed Cu70Fe30 specimens also revealed a non-magnetic phase of iron with a f.c.c. environment, which was probably stabilized by the presence of copper and small quantities of nitrogen.Keywords
This publication has 19 references indexed in Scilit:
- Copper–cobalt f.c.c. metastable phase prepared by mechanical alloyingPhilosophical Magazine Part B, 1993
- X-Ray absorption spectroscopy and diffraction study of miscible and immiscible binary metallic systems prepared by ball millingSpectrochimica Acta Part A: Molecular Spectroscopy, 1993
- Far-from-equilibrium phase transition induced by mechanical alloying in the CuFe systemJournal of Alloys and Compounds, 1993
- Mechanical alloying of CoCu powder mixturesScripta Metallurgica et Materialia, 1993
- Low-temperature stable nanometer-size fcc-Fe particles with no magnetic orderingPhysical Review B, 1992
- Reversible grain size changes in ball-milled nanocrystalline Fe–Cu alloysJournal of Materials Research, 1992
- Granular cobalt in a metallic matrixJournal of Applied Physics, 1991
- X-ray diffraction study of the amorphization process by mechanical alloying of the NiTi systemMaterials Science and Engineering, 1988
- Improving the validity of hyperfine field distributions from magnetic alloysNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1987
- Magnetic properties ofsolid solutionsPhysical Review B, 1986