Drive Cycle Identification and Energy Demand Estimation for Refuse-Collecting Vehicles
Authors:
- 18 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 64 (11) , 4965-4973
Abstract
Drive cycle identification and future energy demand prediction are advantageous when developing hybrid propulsion systems. They are applicable to vehicles that are driven along the same route every day, such as busses, refuse-collecting vehicles (RCVs), or delivery vehicles. Drive cycle identification can be used to identify what power transients can be expected to prepare the power train to operate under these conditions. If the energy management algorithm of a hybrid vehicle can account for future energy demand, then it can be arranged in such a way that the non-fossil-fuel energy sources are fully depleted at the end of the drive cycle. Given that RCVs always drive in similar drive cycles, a drive cycle has been modeled and its main characteristics parameterized. The model is separated into different drive cycles that are related to different power consumption modes. In this paper, a new method to identify drive cycles and the energy left to finish a route is proposed. The drive cycle identification is based on artificial intelligence algorithms, which have been trained and tested with real data with an average efficiency in drive cycle identification of over 90%. The energy necessary to finish the route is based on vehicle energy models and statistical analysis. This method can be used in the daily management of fleet vehicles to replace fossil fuel by electric energy, as is demonstrated in the proposed examples.Keywords
Funding Information
- Ros Roca Group
- Ferrovial Servicios
This publication has 10 references indexed in Scilit:
- Experimentally Compared Fuel Consumption Modelling of Refuse Collecting Vehicles for Energy Optimization PurposesSAE International Journal of Commercial Vehicles, 2014
- Drive Cycle Prediction and Energy Management Optimization for Hybrid Hydraulic VehiclesIEEE Transactions on Vehicular Technology, 2013
- Predictive energy management for hybrid vehicleControl Engineering Practice, 2012
- Road vehicle state estimation using low-cost GPS/INSMechanical Systems and Signal Processing, 2011
- Intelligent Vehicle Power Control Based on Machine Learning of Optimal Control Parameters and Prediction of Road Type and Traffic CongestionIEEE Transactions on Vehicular Technology, 2009
- Route Prediction from Trip ObservationsSAE International Journal of Advances and Current Practices in Mobility, 2008
- Development of a Novel Sensorless Longitudinal Road Gradient Estimation Method Based on Vehicle CAN Bus DataIEEE/ASME Transactions on Mechatronics, 2007
- Assessing the potential of predictive control for hybrid vehicle powertrains using stochastic dynamic programming2005
- Intelligent Energy Management Agent for a Parallel Hybrid Vehicle—Part II: Torque Distribution, Charge Sustenance Strategies, and Performance ResultsIEEE Transactions on Vehicular Technology, 2005
- Intelligent Energy Management Agent for a Parallel Hybrid Vehicle—Part I: System Architecture and Design of the Driving Situation Identification ProcessIEEE Transactions on Vehicular Technology, 2005