Accelerated Alkaline Attack of 3D Printing Polymers to Assess Their Durability in Geopolymer-Based Matrices
- 1 November 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 33 (11) , 04021327
Abstract
Geopolymers exhibit high mechanical performance and low emissions, and have garnered interest in the construction sector. The brittleness of geopolymer matrices has led to a demand for materials to reinforce them and make them suitable for applications involving tensile or dynamic loading, such as reinforcements produced with 3D printing. However, the durability of polymers currently used in 3D printing in geopolymer matrices is unknown. The properties of polylactic acid (PLA) and poly(ethylene terephthalate)-glycol (PETG), when immersed in an alkaline solution that simulates the pore water of geopolymer matrices, were assessed with weight monitoring, Fourier transform infrared spectroscopy, thermal analysis, and direct tensile tests. The results showed that new carbonyl compounds are formed in the extension of the polymeric chains, which could be associated with the oxidation of the chains. PLA presented a weight loss of 35.83% and a decrease in tensile strength of 45.62%. PETG showed no significant changes in properties, indicating its good durability in geopolymer matrices.
Keywords
This publication has 47 references indexed in Scilit:
- Recycled nylon fibers as cement mortar reinforcementConstruction and Building Materials, 2015
- Geopolymers and Related Alkali-Activated MaterialsAnnual Review of Materials Research, 2014
- Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foamsPolymer, 2013
- FT-IR characterization and hydrolysis of PLA-PEG-PLA based copolyester hydrogels with short PLA segments and a cytocompatibility studyJournal of Polymer Science Part A: Polymer Chemistry, 2013
- From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its PrecursorsBiomacromolecules, 2011
- Mechanical Properties of Ternary Blends of ABS + HIPS + PETGPolymer-Plastics Technology and Engineering, 2009
- Creating Open-celled Solid-state Foams Using UltrasoundJournal of Cellular Plastics, 2009
- Improving mechanical performance of injection molded PLA by controlling crystallinityJournal of Applied Polymer Science, 2007
- Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)Journal of Applied Polymer Science, 2005
- The pH measurement of concrete and smoothing mortar using a concrete powder suspensionCement and Concrete Research, 2004