Predicted performance of hot mix asphalt modified with nano-montmorillonite and nano-silicon dioxide based on Egyptian conditions
- 25 July 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (5) , 642-652
Abstract
This paper focused on predicting the performance of asphalt mixes modified with nano-montmorillonite (NMMT) and nano silicon dioxide (NSD) using the Quality-Related Specifications Software (QRSS), which is a simplification to the Pavement ME Design. The nanomaterials were thoroughly mixed with the binder at a temperature of 145 ± 5°C. The conventional and the rheological properties were determined for the penetration grade 60–70 control binder as well as binders modified by 3, 5 and 7% of NMMT and NSD by the weight of asphalt. The optimum nanomaterial content was found for each modifier and was then used for preparing asphalt mixtures by the conventional Marshall method. Finally, Witczak 1-40D complex shear modulus (G*) based predictive model was used to estimate the dynamic modulus (E*) for the control and nanomodified asphalt mixtures. The field performance in terms of asphalt concrete (AC) layer rutting and fatigue cracking was predicted using the QRSS software for two typical pavement sections and three different climatic locations in Egypt (Alexandria, Cairo and Aswan). The simulation runs revealed that both nanomodified asphalt mixtures exhibited superior pavement performance in terms of AC rutting compared to the control mix without a significant effect on fatigue life.Keywords
This publication has 51 references indexed in Scilit:
- Fundamental Characterization of Asphalt Clay NanocompositesJournal of Nanomechanics and Micromechanics, 2013
- Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopyConstruction and Building Materials, 2013
- The addition effects of macro and nano clay on the performance of asphalt binderEgyptian Journal of Petroleum, 2012
- Study of High Temperature Performance and Low Temperature Property on Layered Silicate Modified Asphalt ConcreteKey Engineering Materials, 2012
- Study on how to Improve Asphalt-Modified with SBS-Added Carbon-Nanotubes-MaterialAdvanced Materials Research, 2012
- Research on the Performance of Asphalt Modified by SBS Rubber and Carbon NanotubeApplied Mechanics and Materials, 2011
- Nanoclay-modified asphalt materials: Preparation and characterizationConstruction and Building Materials, 2011
- Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixtureConstruction and Building Materials, 2011
- Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticlesConstruction and Building Materials, 2010
- Statistical Applications and Stochastic Analysis for Performance-Related Specification of Asphalt Quality AssuranceTransportation Research Record: Journal of the Transportation Research Board, 2010