Intermediate temperature degradation of a SiC/BN/SiC (MI) composite with holes at 500–900°C in steam
- 25 June 2024
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 107 (10) , 6646-6666
Abstract
Specimens from a Hi‐Nicalon Type S/BN/SiC (MI) ceramic matrix composite with multiple machined holes were subjected to a furnace dwell and then tensile tested. The furnace temperature range was 500–900°C, and the atmosphere was pure steam to approximate the temperature and sea level partial pressure of water vapor in the cooling air going through turbomachinery cooling holes. Exposure of control specimens was done in laboratory air at the same temperatures. Tensile results along with microscopy and spectroscopy showed significant strength degradation in some conditions due primarily to oxidation of the boron nitride fiber coating, with coating volatilization at lower temperatures and probable fiber‐to‐matrix bonding and imposed fiber stresses at higher temperatures. The greatest strength degradation occurred in the 500–600°C steam range. The fiber coating oxidation/volatilization was especially evident near the holes and was exacerbated in the lower temperature tests by porosity networks that were open to the atmosphere at fiber tow ends at the specimen edges and along the inner walls of the holes.Keywords
Funding Information
- Air Force Research Laboratory
This publication has 48 references indexed in Scilit:
- Oxidation of SiC/BN/SiC ceramic matrix composites in dry and wet oxygen at intermediate temperaturesJournal of the European Ceramic Society, 2022
- Modeling stress–strain behavior of ceramic compositesInternational Journal of Ceramic Engineering & Science, 2021
- Coating recession effects in ceramic composite strengthJournal of the Mechanics and Physics of Solids, 2021
- Stress‐Environmental Effects on Fiber‐Reinforced SiC‐Based Composites2014
- Thermodynamics of gas phase species in the Si–O–H systemThe Journal of Chemical Thermodynamics, 2005
- Intermediate temperature strength degradationin SiC/SiC compositesJournal of the European Ceramic Society, 2002
- Notch sensitivity of fatigue life in a Sylramic TM/SiC composite at elevated temperatureComposites Science and Technology, 2001
- Stress-Rupture of Nicalon™/SiC at Intermediate Temperatures1997
- Thermochemical Data of Pure Substances1995
- Overview no. 85 The mechanical behavior of ceramic matrix compositesActa Metallurgica, 1989