Performance and Design of LVL Walls Coupled with UFP Dissipaters
- 3 February 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 19 (3) , 383-409
Abstract
This article presents recent research on the seismic resistance of coupled post-tensioned timber walls for use in multi-story buildings. The walls are constructed from laminated veneer lumber (LVL), post-tensioned with unbonded vertical tendons, and coupled together with mild steel U-shaped flexural plates (UFPs) as energy dissipating elements. The timber wall design follows the same principles as used for post-tensioned precast concrete wall systems, using U-shaped plates to obtain a “hybrid” system, where energy is dissipated through yielding of the plates, while the vertical post-tensioning provides the restoring force. In this project, the same principles are applied to timber coupled walls. A series of quasi-static cyclic and pseudo-dynamic tests have been carried out to verify the applicability of the concept and the feasibility of the construction technology in timber buildings. The U-shaped plates showed stable energy dissipation characteristics and, in combination with the post-tensioning, desirable re-centering hysteretic behavior typically referred to as “flag-shape”. Because of the simplicity of these elements and the low cost of implementation, they have good prospects for practical application.Keywords
Funding Information
- Structural Timber Innovation Company
- Forest Industries Development Agenda
This publication has 9 references indexed in Scilit:
- Long-Term Behavior of Prestressed LVL Members. I: Experimental TestsJournal of Structural Engineering, 2011
- Posttensioned Hybrid Coupled Walls under Lateral LoadsJournal of Structural Engineering, 2004
- Posttensioned Energy Dissipating Connections for Moment-Resisting Steel FramesJournal of Structural Engineering, 2002
- ANALYTICAL MODELLING OF THE SEISMIC BEHAVIOUR OF PRECAST CONCRETE FRAMES DESIGNED WITH DUCTILE CONNECTIONSJournal of Earthquake Engineering, 2001
- A Hybrid Reinforced Precast Frame for Seismic RegionsPCI Journal, 1997
- Dynamic response of flexibly jointed framesEngineering Structures, 1995
- Overview of PRESSS Research ProgramPCI Journal, 1991
- Pseudodynamic Method for Seismic TestingJournal of Structural Engineering, 1985
- Mechanisms of energy absorption in special devices for use in earthquake resistant structuresBulletin of the New Zealand Society for Earthquake Engineering, 1972