Investigating asymmetric spatial butterfly-shaped steel arch bridges: a case study
- 1 March 2021
- journal article
- research article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 174 (1) , 13-27
Abstract
Jiusha Bridge in Hangzhou city, China, is an asymmetric spatial butterfly-shaped steel arch bridge. The bridge deck and steel arch rib form a half-through structure at one end and a through structure at the other. The bridge sits on a soft soil foundation with poor thrust resistance; therefore, different force transmission structures adopted at the asymmetric ends to balance the large arch thrust during internal force transmission of the structure were researched. The mechanical behaviour of the asymmetric steel arch bridge under dead load and live load was compared with that of a symmetric half-through and through steel arch bridge. Subsequently, a full-bridge finite-element (FE) model was established in order to adjust the stiffness contribution of the middle arch and side arches to the bridge, optimise the hanger forces in the finished bridge state and analyse the bridge's stress, stiffness, stability and dynamic characteristics. The stresses in some key members and joints were calculated by means of a refined FE model consisting of beam elements, truss elements and plate elements. Some of the special construction technologies used on Jiusha Bridge are also briefly discussed.Keywords
This publication has 7 references indexed in Scilit:
- China's first road‐cum‐railway suspension bridge with rigid‐cables of three main stiffening frames in parallel: The two‐storey Jinan Yellow River BridgeStahlbau, 2018
- Load effect and fatigue damage of bridges under combined actions of traffic and wind: a case studyStahlbau, 2016
- Buckling design of steel tied-arch bridgesJournal of Constructional Steel Research, 2014
- Recent development of design and construction of medium and long span high-speed railway bridges in ChinaEngineering Structures, 2014
- Investigation of in-plane behaviour of concrete-filled steel tubular model arches with corrugated steel websProceedings of the Institution of Civil Engineers - Bridge Engineering, 2013
- Improved hanger design for robustness of through-arch bridgesProceedings of the Institution of Civil Engineers - Bridge Engineering, 2013
- Dongping Channel Bridge: Long-Span Steel Arch Bridge in High-Speed Railway, ChinaStructural Engineering International, 2011