A novel equestrian helmet testing method: helmet liner performance in highly realistic simulation
- 28 November 2023
- journal article
- research article
- Published by Taylor & Francis in The Physician and Sportsmedicine
- Vol. 52 (4) , 381-385
Abstract
Employ a novel testing method to assess Multi Directional Impact Protection System (MIPS) helmet technology on rotational velocity and acceleration during head impact. An optimization study was completed utilizing a 50th percentile male Hybrid III anthropomorphic test device (ATD or dummy). Helmets included basic Expanded Polystyrene foam (EPS) and two different MIPS helmets (MIPS1 and MIPS2). A 24.38-meter-long elevated track with rails and a motorized sled was utilized to replicate a fall from a height of approximately 2.13 meters. The motorized sled was set to a pre-set speed of 20.92 kph, controlled by Siemen's Human Machine Interface (HMI) technology at the end of the track, a tripping mechanism induced rotation in the ATD from the sled and onto a sand surface. Data was obtained from DTS SLICE NANO recorders as well as triaxial linear accelerators and angular rate sensors positioned within the head form of the ATD. During impact of the ATD with the sand surface, the head kinematics were measured using resultant acceleration (peak G's), duration of impact (ms) and rotational velocity (rad/s). A total of three trials for each helmet did not demonstrate a significant difference between the EPS vs. MIPS 1 group with, peak (G's) for resultant acceleration (p = 0.100), duration (ms) for resultant acceleration, (p = 0.100), peak (G's) for rotational velocity, (p = 0.700), and duration (ms) for rotational velocity, (p = 0.700). Similarly, the EPS vs. MIPS 2 testing demonstrated no significant differences between the MIPS 2 helmet when compared to the EPS helmet, with resultant acceleration (p = 0.400), duration acceleration (p = 0.200), rotational velocity (p = 0.400) and duration velocity (p = 0.400). However, when the MIPS helmet data was pooled, (total impacts n = 6) and the EPS helmet data (total impacts n = 3) were compared, a statistically significant difference in the duration of acceleration was found (p = 0.048). Current testing uses a helmeted head form which is dropped or rolled from a prescribed height. These methods discount the tremendous loading placed on the neck and head through the angular momentum of the body itself. Our novel testing method did not find significant differences between the various helmet types in their performance at diminishing peak rotational forces to the brain, however our data suggests that MIPS helmet liners may reduce duration of impact. The reduction of acceleration duration could indicate less overall rotation of the neck, due to the dampening of these forces by the MIPS liners.Keywords
Funding Information
- No funding
This publication has 10 references indexed in Scilit:
- Effect of helmet design on impact performance of industrial safety helmetsHeliyon, 2022
- The Challenges of Equestrian Arena Surfaces: The Unprecedented Use of a Raised Platform at the 2012 Olympic GamesJournal of Equine Veterinary Science, 2022
- Impact Performance Comparison of Advanced Snow Sport Helmets with Dedicated Rotation-Damping SystemsAnnals of Biomedical Engineering, 2021
- Equestrian Helmet Standards: Do They Represent Real-World Accident Conditions?Annals of Biomedical Engineering, 2020
- Could a Compliant Foam Anvil Characterize the Biofidelic Impact Response of Equestrian Helmets?Journal of Biomechanical Engineering, 2020
- Head and Spinal Injuries in Equestrian Sports: Update on Epidemiology, Clinical Outcomes, and Injury PreventionOptometry and Vision Science, 2020
- Adult sports-related traumatic brain injury in United States trauma centersNeurosurgical Focus, 2016
- A Threshold Shear Force for Calcium Influx in an Astrocyte Model of Traumatic Brain InjuryJournal of Neurotrauma, 2015
- Trauma-Induced Plasmalemma Disruptions in Three-Dimensional Neural Cultures Are Dependent on Strain Modality and RateJournal of Neurotrauma, 2011
- Deformation mechanisms and energy absorption of polystyrene foams for protective helmetsPolymer Testing, 2002