On the Reflectivity Measurements of Microwave Blackbody in Bistatic Near-Field Configuration
- 2 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (11) , 8027-8032
Abstract
Determining the total reflectivity of a manufactured microwave blackbody is a significant problem for the microwave radiometer calibration. In this work, the authors report the progress in testing the standard facility for microwave blackbody reflectivity determination in China. Following a bistatic configuration, the facility is designed to measure the Floquet scattering properties of the array-shaped microwave blackbody, and then based on that, the total reflectivity is extracted, covering a vast frequency range from 6 to 500 GHz. In this work, the key configurations of the facility design, the testing procedures, and the data processes are demonstrated. And the measured results validate the ability of the standard facility in capturing weak Floquet scattering from blackbody targets. Two typical types of array-shaped blackbodies, coated cones, and coated pyramids are included in this study. In the results, the effects of manufacturing imperfections on the measured scattering as well as the total reflectivity are investigated. Furthermore, it is shown in the results of 364, 380, and 452 GHz that the issue of referencing target is worthy of further investigation at very high frequencies. The presented design, testing procedure, and measured scattering properties provide direct reference for the blackbody reflectivity determination in the microwave radiometer calibration applications.Keywords
Funding Information
- National key research and development program (2017YFF0205203)
- National Nature Science Foundation of China (61671032, 61701496)
- Fundamental Research Funds for the Central Universities (buctrc201931)
This publication has 23 references indexed in Scilit:
- Electromagnetic Design of Calibration Targets for MetOp-SG Microwave InstrumentsIEEE Transactions on Terahertz Science and Technology, 2017
- Brightness Temperature Computation of Microwave Calibration TargetsIEEE Transactions on Geoscience and Remote Sensing, 2017
- Effects of Coating Material Properties on the Wideband Reflectivity Performance of Microwave Calibration TargetsIEEE Transactions on Antennas and Propagation, 2017
- ANALYSIS ON THE FLOQUET SCATTERING LOBES FROM MICROWAVE CALIBRATION TARGETSProgress In Electromagnetics Research B, 2017
- On the Coiflet-TDS Solution for Scattering by Sharp Coated Cones and Its Application to Emissivity DeterminationIEEE Transactions on Geoscience and Remote Sensing, 2015
- Progress towards a NIST microwave brightness temperature standard for remote sensing2014
- SIMULATION ANALYSIS OF THE EFFECT OF MEASURED PARAMETERS ON THE EMISSIVITY ESTIMATION OF CALIBRATION LOAD IN BISTATIC REFLECTION MEASUREMENTProgress In Electromagnetics Research, 2012
- The FengYun-3 Microwave Radiation Imager On-Orbit VerificationIEEE Transactions on Geoscience and Remote Sensing, 2011
- Recent progress on space-borne microwave sounder pre-launch calibration technologies in ChinaJournal of Systems Engineering and Electronics, 2008
- Proposed Development of a National Standard for Microwave Brightness Temperature2006