Cenospheres-Reinforced PA-12 Composite: Preparation, Physicochemical Properties, and Soaking Tests
Open Access
Abstract
The main aim of this research was the preparation of a polymer–ceramic composite with PA-12 as the polymer matrix and modified aluminosilicate cenospheres (CSs) as the ceramic filler. The CSs were subjected to an early purification and cleaning process, which was also taken as a second objective. The CSs were surface modified by a two-step process: (1) etching in Piranha solution and (2) silanization in 3-aminopropyltriethoxysilane. The composite was made for 3D printing by FDM. Raw and modified CSs and a composite with PA-12 were subjected to the following tests: surface development including pores (BET), real density (HP), chemical composition and morphology (SEM/EDS, FTIR), grain analysis (PSD), phase composition (XRD), hardness (HV), and static tensile tests. The composites were subjected to soaking under simulated body fluid (SBF) conditions in artificial saliva for 14, 21, and 29 days. Compared to pure PA-12, PA-12_CS had generally better mechanical properties and was more resistant to SBF at elevated temperatures and soaking times. These results showed this material has potential for use in biomedical applications. These results also showed the necessity of developing a kinetic aging model for aging in different liquids to verify the true value of this material.Keywords
Funding Information
- the National Science Centre’s (NCN) financial support (2019/03/X/ST5/00042, 07/020/RGH20/0062)
- the Rector’s Habilitation Grant and the Silesian University of Technology (2019/03/X/ST5/00042, 07/020/RGH20/0062)
This publication has 54 references indexed in Scilit:
- Cenospheres: A reviewFuel, 2017
- Mechanical and physical properties of highly ZrO2 /β-TCP filled polyamide 12 prepared via fused deposition modelling (FDM) 3D printer for potential craniofacial reconstruction applicationMaterials Letters, 2017
- Direct silanization of zirconia for increased biointegrationActa Biomaterialia, 2016
- High density polyethylene/cenosphere composites reinforced with multi-walled carbon nanotubes: Mechanical, thermal and fire retardancy studiesMaterials & Design (1980-2015), 2015
- Synthesis of protocatechuic acid–zinc/aluminium–layered double hydroxide nanocomposite as an anticancer nanodelivery systemJournal of Solid State Chemistry, 2015
- Effect of silanization on chitosan porous scaffolds for peripheral nerve regenerationCarbohydrate Polymers, 2014
- Composition and Morphology of Fly Ash Cenospheres Produced from the Combustion of Kuznetsk CoalEnergy & Fuels, 2013
- Determination of Si/Al Ratios in Semicrystalline Aluminosilicates by FT-IR SpectroscopyApplied Spectroscopy, 2002
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Photoemission of gold in the energy range 30-300 eV using synchrotron radiationPhysical Review B, 1976