Noble Metals for Modern Implant Materials: MOCVD of Film Structures and Cytotoxical, Antibacterial, and Histological Studies
Authors:
- Svetlana I. DorovskikhSDSvetlana I. Dorovskikh
- Evgeniia S. VikulovaEvgeniia S. Vikulova
- Elena V. ChepelevaElena V. Chepeleva
- Maria B. VasilievaMVMaria B. Vasilieva
- Dmitriy A. NasimovDmitriy A. Nasimov
- Eugene A. MaksimovskiiEMEugene A. Maksimovskii
- Alphiya R. TsygankovaATAlphiya R. Tsygankova
- Tamara V. BasovaTamara V. Basova
- David S. SergeevichevDavid S. Sergeevichev
- Natalya B. MorozovaNatalya B. Morozova
Open Access
- 21 July 2021
- journal article
- research article
- Published by MDPI AG in Biomedicines
- Vol. 9 (8) , 851
Abstract
This work is aimed at developing the modification of the surface of medical implants with film materials based on noble metals in order to improve their biological characteristics. Gas-phase transportation methods were proposed to obtain such materials. To determine the effect of the material of the bottom layer of heterometallic structures, Ir, Pt, and PtIr coatings with a thickness of 1.4–1.5 μm were deposited by metal–organic chemical vapor deposition (MOCVD) on Ti6Al4V alloy discs. Two types of antibacterial components, namely, gold nanoparticles (AuNPs) and discontinuous Ag coatings, were deposited on the surface of these coatings. AuNPs (11–14 nm) were deposited by a pulsed MOCVD method, while Ag films (35–40 nm in thickness) were obtained by physical vapor deposition (PVD). The cytotoxic (24 h and 48 h, toward peripheral blood mononuclear cells (PBMCs)) and antibacterial (24 h) properties of monophase (Ag, Ir, Pt, and PtIr) and heterophase (Ag/Pt, Ag/Ir, Ag/PtIr, Au/Pt, Au/Ir, and Au/PtIr) film materials deposited on Ti-alloy samples were studied in vitro and compared with those of uncoated Ti-alloy samples. Studies of the cytokine production by PBMCs in response to incubation of the samples for 24 and 48 h and histological studies at 1 and 3 months after subcutaneous implantation in rats were also performed. Despite the comparable thickness of the fibrous capsule after 3 months, a faster completion of the active phase of encapsulation was observed for the coated implants compared to the Ti alloy analogs. For the Ag-containing samples, growth inhibition of S. epidermidis, S. aureus, Str. pyogenes, P. aeruginosa, and Ent. faecium was observed.Keywords
Funding Information
- Russian Science Foundation (20-15-00222)
This publication has 61 references indexed in Scilit:
- The use of noble metal coatings and nanoparticles for the modification of medical implant materialsMaterials & Design, 2021
- Bioinspired surface modification of orthopedic implants for bone tissue engineeringBiomaterials, 2019
- Initial and long‐term crestal bone responses to modern dental implantsPeriodontology 2000, 2016
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A reviewBiomaterials, 2016
- Metallic implant biomaterialsMaterials Science and Engineering: R: Reports, 2015
- Development of new metallic alloys for biomedical applicationsActa Biomaterialia, 2012
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A reviewProgress in Materials Science, 2009
- On the mechanisms of biocompatibilityBiomaterials, 2008
- Dental Implant Design and Its Relationship to Long-Term Implant SuccessImplant Dentistry, 2003
- Metal Sensitivity in Patients with Orthopaedic ImplantsJournal of Bone and Joint Surgery, 2001