Surface modification of basalt fiber using to reinforce polycarbonate composites and its mechanical performance
Authors:
- 15 December 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 46 (7) , 6059-6069
Abstract
Basalt fibers (BF) are often used as reinforcement of composite materials owing to their high strength, heat resistance, and corrosion resistance. The surface‐interface interaction between the fibers and the matrix material plays a key role in determining the mechanical properties of the composite. In this work, BF‐polycarbonate (PC) composites were prepared using melt blending and extrusion molding. BF was modified with 3‐aminopropyltriethoxysilane (KH550) to enhance surface roughness and improve interfacial bonding, resulting in modified fibers (KBF). The bending strength of KBF‐PC was increased 28.8% compared with unmodified BF‐PC. Further modification of BF using polyethylene glycol (PEG) and KH550 to obtain PKBF, resulting in a 42.26% increase in bending strength. To further enhance the mechanical properties of the composites, PKBF was modified with nano‐alumina, resulting in a 48.41% increase in bending strength. The relationship between fiber content and composite mechanical properties was studied using theoretical models such as Halpin‐Tsai, Kelly‐Tyson, and ROM. The mechanisms by which different modified fibers enhance the mechanical strength of composites were explored. The interfacial compatibility between the matrix material and BF would be significantly improved through surface modification, resulting in enhanced mechanical performance of the composite.Highlights: PEG‐KH550 treatment of basalt fibers to enhance interfacial adhesion. Al2O3 modified basalt fibers to enhance the bending strength of the composite. Treated fibers exhibit improved tensile and bending properties of composite. The mathematical model shows the reliability of the experimental data.Keywords
This publication has 23 references indexed in Scilit:
- Effect of ZrO2-TiO2 co-doping on the structure, alkali resistance and mechanical properties of basalt fibersConstruction and Building Materials, 2024
- Basalt fibers: An environmentally acceptable and sustainable green material for polymer compositesConstruction and Building Materials, 2024
- Investigation of sisal fiber cords impact to improve the mechanical properties of plaster-based compositesEuro-Mediterranean Journal for Environmental Integration, 2024
- Prediction of interphase parameters for nanocellulose composites using a modified Halpin–Tsai approachCellulose, 2023
- Silane coupling agent impact on surface features of modification of basalt fibers and the rheological properties of basalt fiber reinforced asphaltConstruction and Building Materials, 2023
- Study on the dispersibility of modified basalt fiber and its influence on the mechanical properties of concreteConstruction and Building Materials, 2022
- The effects of chemical grafting 1,6-hexanediol diglycidyl ether on the interfacial adhesion between continuous basalt fibers and epoxy resin as well as the tensile strength of compositesConstruction and Building Materials, 2022
- Synergistic bridging effects of graphene oxide and carbon nanotube on mechanical properties of aramid fiber reinforced polycarbonate composite tapeComposites Science and Technology, 2020
- A proposal to modify the Kelly-Tyson equation to calculate the interfacial shear strength (IFSS) of composites with low aspect ratio fibersComposites Science and Technology, 2020
- Modification of carbon fibers surfaces with polyetheramines: The role of interphase microstructure on adhesion properties of CF/epoxy compositesPolymer Composites, 2017