Performance Investigation and Cogging Torque Reduction in a Novel Modular Stator PM Flux Reversal Machine
Open Access
Abstract
In this research paper, various performances of five different rotor pole topologies of the proposed novel modular stator (MS) permanent magnet (PM) flux reversal machine were investigated. The proposed design had concentrated, non-overlapping winding, which offered high average torque capability at a wide speed range. The no-load performances such as coil test analysis, three-phase flux linkage, flux distribution, back-EMF, and cogging torque, and load analysis, such as average torque versus current density, instantaneous torque, and average electromagnetic torque, were compared. The PM modular stator machine had high cogging torque, which created vibration and noise in the machine. Different cogging torque reduction techniques, such as notching, arc, flange and hybrid technique arc flange, arc notch, notch flange, and arc notch flange, were applied to reduce the cogging torque, improve average load torque, and reduce the induced voltage, harmonics, and torque ripples. The maximum cogging torque decreased by 87.66% and 82% when the arc notch flange and notch arc techniques were applied, respectively, and the minimum effect on cogging torque by the flange technique was 20.66%. Furthermore, the arc flange technique reduced the average torque by 66.72%. The maximum induced voltage was reduced by up to 12.83% using the notch arc technique. The hybrid technique of arc notch flange reduced the harmonics content in flux by 40% and enhanced electromagnetic performance. When applying the hybrid arc notch flange technique, torque ripples were reduced to 90.11%.Keywords
This publication has 20 references indexed in Scilit:
- Design Consideration and Evaluation of a 12/8 High-Torque Modular-Stator Hybrid Excitation Switched Reluctance Machine for EV ApplicationsIEEE Transactions on Industrial Electronics, 2017
- Design Procedure of Flux Reversal Permanent Magnet MachinesIEEE Transactions on Industry Applications, 2017
- Comprehensive Research of Modular E-Core Stator Hybrid-Flux Switched Reluctance Motors With Segmented and Nonsegmented RotorsIEEE Transactions on Energy Conversion, 2016
- Design of Three-Phase Flux-Reversal Machines With Fractional-Slot WindingsIEEE Transactions on Industry Applications, 2016
- Consequent-Pole Flux-Reversal Permanent-Magnet Machine for Electric Vehicle PropulsionIEEE Transactions on Applied Superconductivity, 2016
- Partitioned Stator Flux Reversal Machine With Consequent-Pole PM StatorIEEE Transactions on Energy Conversion, 2015
- Selection of PM Flux Linkage for Maximum Low-Speed Torque Rating in a PM-Assisted Synchronous Reluctance MachineIEEE Transactions on Industry Applications, 2015
- Quantitative Comparison of Flux-Switching Permanent-Magnet Motors With Interior Permanent Magnet Motor for EV, HEV, and PHEV ApplicationsIEEE Transactions on Magnetics, 2012
- Theoretical characterization of flux reversal machine in low-speed servo drives-the pole-PM configurationIEEE Transactions on Industry Applications, 2002
- Characterization of three phase flux reversal machine as an automotive generatorIEEE Transactions on Energy Conversion, 2001