Stiffness of Soil–Geosynthetic Composite under Small Displacements: I. Model Development
- 1 October 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 143 (10)
Abstract
While significant emphasis has been placed on the quantification of soil–geosynthetic properties under failure conditions, studies of properties that are suitable for characterizing this interaction under serviceability conditions have been limited. Also, most geosynthetic properties are currently defined in isolation rather than under the confinement of soil. The purpose of this study is to develop a soil–geosynthetic interaction framework that, with a single and repeatable parameter, can capture the stiffness of a soil–geosynthetic composite under small displacements. The soil–geosynthetic interaction model developed in this study involves well-established force equilibrium differential equations. However, the constitutive relationships and boundary conditions were specifically selected so that the model results in a closed-form analytical solution. Since the analytical solution involves a single parameter, its use may be particularly suitable for specifications and the design of structures such as stabilized roadways. This parameter, referred to as the stiffness of the soil–geosynthetic composite, or , captures both the tensile characteristics of the geosynthetic and the shear behavior of the soil–geosynthetic interface. Experimental procedures to quantify were developed as part of this study. The results of a pilot experimental program, conducted using tailor-made soil–geosynthetic interaction equipment, are presented in the paper. These results confirm the suitability of the assumptions and outcomes of the model. A companion paper provides the results of a comprehensive experimental program with particular emphasis on the evaluation of the repeatability of the results and on the sensitivity of the assumptions and outcomes of the model to variables that impact .
Keywords
This publication has 33 references indexed in Scilit:
- An analytical method to predict the pullout response of geotextilesGeosynthetics International, 2010
- Soil–geosynthetic interaction: Modelling and analysisGeotextiles and Geomembranes, 2009
- Displacement and load transfer mechanisms of geogrids under pullout conditionGeotextiles and Geomembranes, 2009
- Geogrid in Flexible PavementsTransportation Research Record: Journal of the Transportation Research Board, 2008
- Some factors affecting the in-soil load–strain behaviour of virgin and damaged nonwoven geotextilesGeosynthetics International, 2007
- Testing of Reinforced Slopes in a Geotechnical CentrifugeGeotechnical Testing Journal, 1997
- Pullout force/displacement relationship of extensible grid reinforcementsGeotextiles and Geomembranes, 1994
- Finite element modelling of soil-geogrid interaction with application to the behavior of geogrids in a pullout loading conditionGeotextiles and Geomembranes, 1993
- Measuring Inherent Load-Extension Properties of Geotextiles for Design of Reinforced StructuresGeotechnical Testing Journal, 1991
- A simple laboratory method to estimate the in-soil behaviour of geotextilesGeotextiles and Geomembranes, 1989