The Development of a Novel Aluminosilicate Catalyst Fabricated via a 3D Printing Mold for Biodiesel Production at Room Temperature
Open Access
- 22 January 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (3) , 1094
Abstract
Biodiesel production has gained attention as a sustainable alternative to fossil fuels, but challenges related to catalyst recovery and energy consumption remain. In this study, a novel lithium-impregnated aluminosilicate catalyst (LiSA) was developed using a 3D-printed mold, providing precise control over its structure to optimize performance. The structured catalyst featured a cylindrical shape with multiple circular channels, enhancing fluid dynamics and reactant interaction in a fixed-bed reactor. Catalyst characterization by SEM, TGA, XRD, and ICP-MS confirmed high thermal stability and uniform pore distribution. Jatropha curcas oil was used as feedstock, with diethyl ether (DEE) acting as a cosolvent to improve methanol solubility and enable transesterification at room temperature. The process achieved a high fatty acid methyl ester (FAME) yield, averaging 97.1% over 508 min of continuous operation, demonstrating the catalyst’s stability and sustained activity. By reducing mass transfer limitations and energy demands, this approach highlights the potential of 3D-printed catalysts to advance sustainable biodiesel production, offering a scalable and efficient pathway for green energy technologies.Keywords
This publication has 21 references indexed in Scilit:
- Biobased heterogeneous renewable catalysts: Production technologies, innovations, biodiesel applications and circular bioeconomyEnvironmental Research, 2024
- A comprehensive review of the influence of co-solvents on the catalysed methanolysis process to obtain biodieselHeliyon, 2023
- Response surface methodology for continuous biodiesel production from Jatropha curcas oil using Li/pumice as catalyst in a packed-bed reactor assisted with diethyl ether as cosolventChemical Engineering and Processing - Process Intensification, 2022
- A review of 3D printing techniques for environmental applicationsCurrent Opinion in Chemical Engineering, 2020
- 3D printing technologies: techniques, materials, and post-processingCurrent Opinion in Chemical Engineering, 2020
- Analysis of the Content of Fatty Acid Methyl Esters in Biodiesel by Fourier‐Transform Infrared Spectroscopy: Method and Comparison with Gas ChromatographyJournal of the American Oil Chemists' Society, 2020
- Use of 3D printing for biofuel production: efficient catalyst for sustainable biodiesel production from wastesClean Technologies and Environmental Policy, 2017
- KOH/bentonite catalysts for transesterification of palm oil to biodieselApplied Clay Science, 2011
- Kalsilite based heterogeneous catalyst for biodiesel productionFuel, 2010
- Esterification and transesterification using modified-zirconia catalystsApplied Catalysis A: General, 2008