Finite element model correlation and calibration of historic masonry monuments: review
- 25 January 2012
- journal article
- research article
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 21 (2) , 96-113
Abstract
Building a reliable finite element (FE) model of historic masonry structures is a difficult undertaking due to the challenges in accurate representation of irregular geometry, complex material behaviour and complicated boundary conditions between structural masonry components. Model calibration refers to correcting the inherent deficiencies within the FE model by matching outputs to measured data. Model calibration has the potential to produce more reliable computer models and thus aid in the economical management and maintenance of contemporary as well as heritage structures. Researchers involved in the assessment of historic masonry monuments have devoted decades of consistent attention to FE model calibration. This paper reviews the recent developments in this topic with a focus on complex vaulted masonry monuments. Studies on simpler forms of masonry structures, such as masonry arch bridges or masonry towers, are also discussed since they lay the groundwork for studies on more complex structures. This paper identifies several remaining technical challenges as model calibration approaches gain wider recognition and usage in historic monument structural assessment. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- Calibration under uncertainty for finite element models of masonry monuments2010
- FULL-SCALE MODAL TESTING OF VAULTED GOTHIC CHURCHES: LESSONS LEARNEDExperimental Techniques, 2009
- Modal Analysis, Experimental Validation, and Calibration of a Historical Masonry MinaretJournal of Testing and Evaluation, 2008
- Structural Identification and Health Monitoring on the Historical Architectural HeritageKey Engineering Materials, 2007
- Analyses of Masonry Vaults: A Macro Approach based on Three-Dimensional Damage ModelJournal of Structural Engineering, 2002
- Non-destructive testing to detect voids hidden behind the extrados of an arch bridgeNDT & E International, 1999
- NON-DESTRUCTIVE EVALUATION OF THE DYNAMIC RESPONSE OF A BRICKWORK ARCH.Proceedings of the Institution of Civil Engineers - Structures and Buildings, 1997
- Modal analysis for masonry arch bridge spandrell wall separation identificationNDT & E International, 1995
- Integrity assessment of masonry arch bridges using the dynamic stiffness techniqueNDT & E International, 1995
- CHANGES IN THE DYNAMIC CHARACTERISTICS OF A MASONRY ARCH BRIDGE SUBJECTED TO MONOTONIC LOADING TO FAILURE1995