Water-Control Optimization Design for Bottom-Water Reservoirs Based on a Hybrid Model
Open Access
Abstract
Horizontal wells in bottom-water reservoirs are highly susceptible to water coning during production. Consequently, accurately evaluating the water-control performance of inflow control valves (ICVs) is critical for optimizing completion strategies. Conventional semi-analytical models often struggle to capture the transient dynamics of multiphase flow, while standard numerical reservoir simulators fail to explicitly resolve the complex geometries of completion hardware. To address these limitations, this study proposes a multiscale composite modeling framework tailored for bottom-water reservoirs. At the near-well scale, a semi-analytical model is developed to characterize wellbore hydraulics and the pressure drops induced by ICV completions. At the reservoir scale, a numerical model is employed to simulate multiphase fluid transport, with the two scales coupled via cross-scale pressure field mapping. Validation against NETool software under steady-state conditions confirms the physical consistency of the near-well model in determining zonal flow allocation. Comparisons with conventional equivalent well numerical models demonstrate that the proposed composite model offers superior resolution of ICV-induced flow redistribution, yielding distinct production performance profiles. Furthermore, the integration of a Particle Swarm Optimization (PSO) algorithm enables the dynamic optimization of ICV settings. Results indicate that this composite framework provides a robust theoretical and computational basis for designing and evaluating intelligent water-control completions in bottom-water reservoirs.Keywords
This publication has 15 references indexed in Scilit:
- Explainable AI for predicting the strength of bio-cemented sandsJournal of Rock Mechanics and Geotechnical Engineering, 2025
- Autonomous flow control device modelling and completion optimisationJournal of Petroleum Science and Engineering, 2019
- Mechanism and sensitivity analysis of an inflow control devices (ICDs) for reducing water production in heterogeneous oil reservoir with bottom waterJournal of Petroleum Science and Engineering, 2016
- A new semi-analytical model for predicting the performance of horizontal wells completed by inflow control devices in bottom-water reservoirsJournal of Natural Gas Science and Engineering, 2015
- Improved Thermal Heavy Oil Recovery from Strong Bottom-Water-Drive Reservoir by Combining SAGD with Downhole Water Sink2014
- Understanding the Roles of Inflow-Control Devices in Optimizing Horizontal-Well PerformanceSPE Drilling & Completion, 2011
- An efficient method for smart well production optimisationJournal of Petroleum Science and Engineering, 2009
- Characterization of Hydraulically-Induced Shale Fracture Network Using an Analytical/Semi-Analytical Model2009
- Coupled Completion and Reservoir Simulation Technology for Well Performance Optimization2009
- Improved Performance of Downhole Active Inflow Control Valves through Enhanced Design: Case Study2008