Prediction of tensile strength of sawn timber: definitions and performance of indicating properties based on surface laser scanning and dynamic excitation
Open Access
- 11 May 2020
- journal article
- research article
- Published by Springer Nature in Materials and Structures
- Vol. 53 (3) , 1-20
Abstract
The presence of wood irregularities such as knots are decisive for the mechanical properties of sawn timber, and efficient utilisation of timber requires methods by which grade determining properties can be predicted with high accuracy. In the glulam and sawmilling industries today, there is a potential and a need for more accurate prediction methods. This paper concerns the performance of a set of indicating properties calculated by means of data from surface laser scanning, dynamic excitation and X-ray scanning, the latter used to obtain boards’ average density. A total number of 967 boards of Norway spruce originating from Finland, Norway and Sweden were used to determine statistical relationships between the indicating properties and the grade determining properties used to grade sawn timber into T-classes. Results show that the indicating properties give coefficients of determination to tensile strength as high as 0.70. Furthermore, results also show that laser scanning of boards with sawn surface finish give basis for almost as accurate grading as what scanning of planed boards do. The results imply that more accurate grading of timber into T-classes is possible by application of a new set of indicating properties. This paper is part one of a series of two papers. In the second paper, two models to derive settings and calculate yield in different strength classes using the indicating properties presented herein are compared and discussed.Keywords
Funding Information
- Stiftelsen för Kunskaps- och Kompetensutveckling (20150179)
This publication has 8 references indexed in Scilit:
- Prediction of tensile strength of sawn timber: models for calculation of yield in strength classesMaterials and Structures, 2020
- TRACHEID EFFECT SCANNING AND EVALUATION OF IN-PLANE AND OUT-OF-PLANE FIBER DIRECTION IN NORWAY SPRUCE TIMBERWood and Fiber Science, 2018
- Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purposeEuropean Journal of Wood and Wood Products, 2017
- Strength grading on the basis of high resolution laser scanning and dynamic excitation: a full scale investigation of performanceEuropean Journal of Wood and Wood Products, 2016
- Discussion of common and new indicating properties for the strength grading of wooden boardsWood Science and Technology, 2015
- Prediction of timber bending strength and in-member cross-sectional stiffness variation on the basis of local wood fibre orientationEuropean Journal of Wood and Wood Products, 2013
- Timber2000
- Principles of Wood Science and Technology1968