Assessment of Simplified Linear Dynamic Analysis of a Multispan Skew Bridge on Steel-Reinforced Elastomeric Bearings
- 1 January 2012
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 17 (1) , 151-160
Abstract
The dynamic response of a three-span reinforced concrete deck on steel girder skew bridge supported by elastomeric bearings is investigated both experimentally and analytically. The case study presents modal parameter estimates obtained from a large-scale field deployment of accelerometers supported under a wireless sensor network. Through output-only system identification, the natural frequencies, damping ratios, and mode shapes are extracted for the first 20 structural poles. Linear dynamic analysis of the bridge through three-dimensional finite-element analysis is then performed to provide a comparison between the response estimate predicted under the minimum requirements of multimode spectral analysis dictated by the AASHTO design specifications and the in-service dynamic response. Linear elastic bearing stiffness in the compressive, shear, and flexural states is estimated using independent design specifications set forth by AASHTO and Standards Australia, and modeled with idealized fixity. The case study concludes that linear dynamic analysis provides a well-correlated, yet conservative estimate of multimodal displacement for bridges supported by steel-reinforced elastomeric bearings when bearing stiffness is defined by using either design specification.Keywords
This publication has 20 references indexed in Scilit:
- Operational modal analysis of a multi-span skew bridge using real-time wireless sensor networksJournal of Vibration and Control, 2010
- Real-time wireless vibration monitoring for operational modal analysis of an integral abutment highway bridgeEngineering Structures, 2009
- Design of a Robust, High-rate Wireless Sensor Network for Static and Dynamic Structural MonitoringJournal of Intelligent Material Systems and Structures, 2008
- Structural identification of Egnatia Odos bridges based on ambient and earthquake induced vibrationsBulletin of Earthquake Engineering, 2008
- Three-dimensional finite element modeling of composite girder bridgesEngineering Structures, 2006
- Structural Finite Element Model Updating Using Ambient Vibration Test ResultsJournal of Structural Engineering, 2005
- Deck modeling for seismic analysis of skewed slab-girder bridgesEngineering Structures, 2002
- Free Vibration of Skewed BridgesJournal of Vibration and Control, 2001
- Seismic analysis and assessment of a skew highway bridgeEngineering Structures, 2000
- A replacement for the srss method in seismic analysisEarthquake Engineering & Structural Dynamics, 1981