A stick–slip linear actuator with high speed and nano-resolution by resonance/non-resonance hybrid driving
- 1 May 2022
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (5) , 055002
Abstract
To achieve high speed, nano-resolution, and large stroke, a resonance/non-resonance hybrid piezoelectric stick–slip actuator with a lever-type flexure hinge (LTFH-PSSA) is proposed in this work. The actuator can achieve high speed and large stroke in the resonance mode by the stick–slip working principle and achieve nano-resolution in the non-resonant mode by the direct drive working principle. The excitation electrical signals used in the two working modes are the sine waveform and half-sine waveform, respectively. Compared with the traditional sawtooth waveform, the excitation signal of the sine and half-sine waveforms have no sudden change of voltage, which are more conducive to reduce the impact and vibration of the system. Moreover, a series of static analysis and modal analysis of the stator are carried out by the finite element method. The experimental system is built to test the output characteristics of the LTFH-PSSA. In the resonance state by the stick–slip working principle, the impedance analysis and frequency characteristic test of the LTFH-PSSA are carried out, which states that the tested resonance frequency agrees well with the simulated ones. When the locking force, the voltage, and the frequency are 2 N, 100 Vp–p, and 1850 Hz, the speed of the LTFH-PSSA is up to 52.71 mm/s, and the backward motion is suppressed completely as well. In the non-resonance state, the resolution can reach 2.19 nm and 2.69 nm in the forward and backward motion, respectively. So far, the proposed actuator ranks first in speed and resolution among all reported LTFH-PSSAs.Keywords
Funding Information
- Science and Technology Development Plan of Jilin Province (20200201057JC, 20190201108JC)
This publication has 39 references indexed in Scilit:
- Stick–slip and slip–slip operation of piezoelectric inertia drives. Part I: Ideal excitationSensors and Actuators A: Physical, 2013
- A piezoelectric-driven rotary actuator by means of inchworm motionSensors and Actuators A: Physical, 2013
- Design of an Inertially Counterbalanced $Z$ -Nanopositioner for High-Speed Atomic Force MicroscopyIEEE Transactions on Nanotechnology, 2013
- Resonant-type Smooth Impact Drive Mechanism (SIDM) actuator using a bolt-clamped Langevin transducerUltrasonics, 2012
- Dynamic modelling of a flexure-based mechanism for ultra-precision grinding operationPrecision Engineering, 2011
- An alternative flat scanner and micropositioning method for scanning probe microscopeReview of Scientific Instruments, 2010
- Development of a piezoelectric multi-axis stage based on stick-and-clamping actuation technologySmart Materials and Structures, 2007
- Design, analysis, fabrication and testing of a parallel-kinematic micropositioning XY stageInternational Journal of Machine Tools and Manufacture, 2007
- A novel long-travel piezoelectric-driven linear nanopositioning stagePrecision Engineering, 2006
- Development of a micro-manipulation system having a two-fingered micro-handIEEE Transactions on Robotics and Automation, 1999