Autonomous trajectory generation of a biped locomotive robot
Authors:
- 1 January 1991
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1983-1988 vol.3
Abstract
Introduces a hierarchical structure for motion planning and learning control of a biped locomotive robot. In this system, trajectories are obtained for a robot's joints on a flat surface by an inverted pendulum equation and a Hopfield type neural network. The former equation is simulated for the motion of the center of gravity of the robot and the network is used for solving the inverse kinematics. A multi-layered neural networks is also used for training, walking modes by compensating for the difference between the inverted pendulum model and the robot. Simulation results show the effectiveness of the proposed method to generate various walking patterns. Next, the authors improved the system to let the robot walk on stairs. They set up two phases as a walking mode; a single-support phase and a double-support phase. Combination of these two phases yields a successful trajectory generation for the robot's walking on a rough surface such as stairs.<>Keywords
This publication has 5 references indexed in Scilit:
- Sensor-Based Control of a Nine-Link BipedThe International Journal of Robotics Research, 1990
- Biped Locomotion1990
- Motion generation of a biped locomotive robot using an inverted pendulum model and neural networks1990
- Trajectory Planning of a Biped Locomotive RobotTransactions of the Institute of Systems, Control and Information Engineers, 1989
- Simple 'neural' optimization networks: An A/D converter, signal decision circuit, and a linear programming circuitIEEE Transactions on Circuits and Systems, 1986