DC Autotransformer-Based Traction Power Supply for Urban Transit Rail Potential and Stray Current Mitigation
- 6 March 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 6 (2) , 762-773
Abstract
The rails are generally employed as the return path of traction current in urban rail transit. As the rails are not totally earth isolated, there exist the rail potential and stray current issues inevitably, which may lead to the electric shock, corrosions, and other hazards. In the past decades, different mitigation measures have been adopted to solve these issues. However, there are some limitations in the existing mitigation measures, such as poor performance, weak applicability, and so on. Therefore, the dc autotransformer (DCAT)-based traction power supply system is proposed in this article for the rail potential and stray current issues. The configurations, principles, and current distributions of DCAT system are analyzed in this article. Then, the comparisons between the DCAT system and the existing system for the rail potential and stray current issues are discussed, considering the different grounding schemes. Finally, the correctness and effectiveness of DCAT system on the rail potential and stray current issues are validated by both simulation and experimental results. Moreover, it is shown that DCAT system transfers the traction current from the rail to other lines and solves the rail potential and stray current issues much effectively.Keywords
Funding Information
- Key Program of National Natural Science Foundation of China (51737001)
This publication has 39 references indexed in Scilit:
- A Novel Approach to Design Cathodic Protection System for High-Voltage Transmission CablesIEEE Transactions on Industry Applications, 2015
- Stray Current Corrosion and Mitigation: A synopsis of the technical methods used in dc transit systemsIEEE Electrification Magazine, 2014
- Effects of earthing systems on stray current for corrosion and safety behaviour in practical metro systemsIET Electrical Systems in Transportation, 2011
- Assessment of Grounding Schemes on Rail Potential and Stray Currents in a DC Transit SystemIEEE Transactions on Power Delivery, 2006
- Analysis of Rail Potential and Stray Current for Taipei MetroIEEE Transactions on Vehicular Technology, 2006
- Control scheme for reducing rail potential and stray current in MRT systemsIEE Proceedings - Electric Power Applications, 2005
- Stray Current Control in DC Mass Transit SystemsIEEE Transactions on Vehicular Technology, 2005
- Single pole-to-earth fault detection and location on a fourth-rail DC railway systemIEE Proceedings - Electric Power Applications, 2004
- DC traction power system groundingIEEE Transactions on Industry Applications, 2002
- Reduction of power converter EMI emission using soft-switching techniqueIEEE Transactions on Electromagnetic Compatibility, 1998