Development of Improved Flexural and Impact Performance of Kevlar/Carbon/Glass Fibers Reinforced Polymer Hybrid Composites
Open Access
- 24 August 2022
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (9) , 245
Abstract
The present investigation focuses on developing cost-effective Carbon/Glass/Kevlar fiber-reinforced polymer hybrid composite laminates for achieving its synergistic effect on flexural and impact performance. It investigates the effect of stacking sequence induced by the use of different fiber types (Kevlar = K, glass = G, and carbon = C) on the flexural and impact performance of the composites. Five hybrid composites (labelled as A = [G2K3G2], B = [KG2CG2K], C = [CKGCGKC], D = [CGKCKGC], E = [CK2CK2C]) and three plain (i.e., non-hybrid) composites (F = [K]7, G = [G]7, H = [C]7) have been fabricated through manual pre-preg lay-up manufacturing techniques. The flexural strength and modulus, hardness, and Izod impact strength have been evaluated for the fabricated composites and compared. The results showed that the D-type hybrid composite achieves the maximum positive hybrid effect as compared to other hybrid composites, possesses a hardness of 59 BHN, a flexural strength of 380 MPa, and modulus of 36 GPa, and impact strength of 80 KJ/m2. The fracture surfaces of the hybrid composite specimen have been analysed using scanning electron microscopy, and compared against the properties achieved for enabling correlations. Furthermore, the cost-efficiency of the hybridization in terms of flexural strength/cost, modulus/cost, and impact strength/cost ratio were evaluated for potential engineering and design applications.Keywords
This publication has 30 references indexed in Scilit:
- Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine applicationComposite Structures, 2017
- A review of the recent developments in biocomposites based on natural fibres and their application perspectivesComposites Part A: Applied Science and Manufacturing, 2015
- Fibre hybridisation in polymer composites: A reviewComposites Part A: Applied Science and Manufacturing, 2014
- Numerical analysis of low-velocity rigid-body impact response of composite panelsInternational Journal of Crashworthiness, 2014
- Hybrid Composite Laminates Reinforced with Kevlar/Carbon/Glass Woven Fabrics for Ballistic Impact TestingThe Scientific World Journal, 2014
- Effects of Manufacturing-Induced Voids on Local Failure in Polymer-Based CompositesJournal of Engineering Materials and Technology, 2008
- Effects of cure cycles on void content and mechanical properties of composite laminatesComposite Structures, 2006
- Impact response and damage tolerance characteristics of glass–carbon/epoxy hybrid composite platesComposites Part B: Engineering, 2001
- A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plasticsComposites, 1987
- Hybrid carbon and glass fibre compositesComposites, 1974