RUBBLE MOUND BREAKWATER OVERTOPPING: ESTIMATION OF THE RELIABILITY OF A 3D NUMERICAL SIMULATION
Authors:
- 25 October 2012
- journal article
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (33)
Abstract
Until recently, physical models were the only way to investigate into the details of breakwaters behavior under wave attack. From the numerical point of view, the complexity of the fluid dynamic processes involved has so far hindered the direct application of Navier-Stokes equations within the armour blocks, due to the complex geometry and the presence of strongly non stationary flows, free boundaries and turbulence. In the present work the most recent CFD technology is used to provide a new and more reliable approach to the design analysis of breakwaters, especially in connection with run-up and overtopping. The solid structure is simulated within the numerical domain by overlapping individual virtual elements to form the empty spaces delimited by the blocks. Thus, by defining a fine computational grid, an adequate number of nodes is located within the interstices and a complete solution of the full hydrodynamic equations is carried out. In the work presented here the numerical simulations are carried out by integrating the three-dimensional Reynolds Average Navier-Stokes Equations coupled with the RNG turbulence model and a Volume of Fluid Method used to handle the dynamics of the free surface. The aim of the present work is to investigate the reliability of this approach as a design tool. Two different breakwaters are considered, both located in Southern Sicily: one a typical quarry stone breakwater, another a more complex design incorporating a spill basin and an armoured layer made up by Coreloc® blocks.Keywords
This publication has 20 references indexed in Scilit:
- Modelling and simulation of wave transformation in porous structures using VOF based two-phase flow modelApplied Mathematical Modelling, 2009
- Numerical analysis of wave overtopping of rubble mound breakwatersCoastal Engineering, 2008
- A coupled numerical model for simulation of wave breaking and hydraulic performances of a composite seawallOcean Engineering, 2006
- RANS modelling applied to random wave interaction with submerged permeable structuresCoastal Engineering, 2006
- Large eddy simulation of spilling and plunging breakersCoastal Engineering, 2006
- 2-D numerical analysis of near-field flow at low-crested permeable breakwatersCoastal Engineering, 2004
- Solitary wave runup and force on a vertical barrierJournal of Fluid Mechanics, 2004
- Modelling of wave loads and hydraulic performance of vertical permeable structuresCoastal Engineering, 2002
- A numerical model for wave motions and turbulence flows in front of a composite breakwaterCoastal Engineering, 2002
- A numerical study of breaking waves in the surf zoneJournal of Fluid Mechanics, 1998