Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing
- 6 January 2015
- journal article
- Published by IOP Publishing in Biofabrication
- Vol. 7 (1) , 015004
Abstract
The development of polymer-calcium phosphate composite scaffolds with tailored architectures and properties has great potential for bone regeneration. Herein, we aimed to improve the functional performance of brittle ceramic scaffolds by developing a promising biopolymer–ceramic network. For this purpose, two strategies, namely, direct printing of a powder composition consisting of a 60:40 mixture of α / β -tricalcium phosphate (TCP) powder and alginate powder or vacuum infiltration of printed TCP scaffolds with an alginate solution, were tracked. Results of structural characterization revealed that the scaffolds printed with 2.5 wt% alginate-modified TCP powders presented a uniformly distributed and interfusing alginate TCP network. Mechanical results indicated a significant increase in strength, energy to failure and reliability of powder-modified scaffolds with an alginate content in the educts of 2.5 wt% when compared to pure TCP, as well as to TCP scaffolds containing 5 wt% or 7.5 wt% in the educts, in both dry and wet states. Culture of human osteoblast cells on these scaffolds also demonstrated a great improvement of cell proliferation and cell viability. While in the case of powder-mixed alginate TCP scaffolds, isolated alginate gels were formed between the calcium phosphate crystals, the vacuum-infiltration strategy resulted in the covering of the surface and internal pores of the TCP scaffold with a thin alginate film. Furthermore, the prediction of the scaffolds’ critical fracture conditions under more complex stress states by the applied Mohr fracture criterion confirmed the potential of the powder-modified scaffolds with 2.5 wt% alginate in the educts as structural biomaterial for bone tissue engineering.Keywords
This publication has 68 references indexed in Scilit:
- Alginate: Properties and biomedical applicationsProgress in Polymer Science, 2012
- The fast release of stem cells from alginate-fibrin microbeads in injectable scaffolds for bone tissue engineeringBiomaterials, 2011
- Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distributionActa Biomaterialia, 2010
- In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate ScaffoldsJournal of Biomaterials Applications, 2010
- Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug‐Release MatricesAdvanced Functional Materials, 2010
- Ionotropic alginate aerogels as precursors of dispersed oxide phasesApplied Catalysis A: General, 2007
- Improvement in mechanical properties of three‐dimensional printing parts made from natural polymers reinforced by acrylate resin for biomedical applications: a double infiltration approachPolymer International, 2005
- HA/alginate hybrid composites prepared through bio-inspired nucleationActa Biomaterialia, 2005
- Modelling bone tissue fracture and healing: a reviewEngineering Fracture Mechanics, 2004
- Ceramics Reliability: Statistical Analysis of Multiaxial Failure Using the Weibull Approach and the Multiaxial Elemental Strength ModelJournal of the American Ceramic Society, 1990