Reuse of Drilling Waste Slurry as the Grouting Material for the Real-Time Capsule Grouting Technique
Open Access
Abstract
A large amount of waste slurry is generated during construction, but direct sedimentation and transportation increase construction costs. Improper treatment leads to ecological and environmental pollution. This paper proposes to reuse drilling waste slurry (DWS) as a raw material from a particular project as a grouting material for the real-time capsule grouting technique (RCG) to replace cement grouting material. This not only deals with DWS but also solves the material demand of RCG. An orthogonal experimental design evaluated the performance of the DWS grouting material (DWS-GM). The five levels for the three factors of this experiment were selected, including the fluidity, bleeding rate, initial setting time, and compression strength. A linear model, support vector machines, and neural networks were used to construct regression models, and the effects of different contents of cement, bentonite, and fly ash on the DWS-GM performance were analyzed. The SVM regression model had better performance in describing the laws of fluidity, bleeding rate, and 28-day compressive strength. Furthermore, the optimization model is proposed to obtain the optimal formulation of the DWS-GM under specific constraints. The optimization results show that the optimal formulation of the DWS-GM was 5.6% cement and 6.9% bentonite. The BL, FL, IST, and 28DCS were 1.61%, 21.87 cm, 27.05 h, and 0.22 MPa to meet the functional requirements of the DWS-GM. The above research fully proves the feasibility of the DWS reuse application. We will further reuse DWS to develop other multifunctional material applications in combination with the control needs of RCG technology and technology from other fields.Keywords
Funding Information
- National Natural Science Foundation of China (52178342, 21JCZDJC00590, 2021YJSB123, 2022-02)
- Natural Science Foundation of Tianjin Municipality (52178342, 21JCZDJC00590, 2021YJSB123, 2022-02)
- Tianjin Research Innovation Project for Postgraduate Students (52178342, 21JCZDJC00590, 2021YJSB123, 2022-02)
- Tianjin Transportation Technology Development Project (52178342, 21JCZDJC00590, 2021YJSB123, 2022-02)
This publication has 31 references indexed in Scilit:
- Preparation and characterization of ceramsite from lime mud and coal fly ashConstruction and Building Materials, 2015
- Sustainability in construction works: Reuse of sludge from tunnel boring in lime mortarsApplied Clay Science, 2015
- Use of wastewater sludge for base and subbase of road pavementsTransportation Research Part D: Transport and Environment, 2014
- Hydrothermal treatment coupled with mechanical expression at increased temperature for excess sludge dewatering: Influence of operating conditions and the process energeticsWater Research, 2014
- Spent drilling muds management and natural environment protectionGospodarka Surowcami Mineralnymi - Mineral Resources Management, 2014
- New composite grouting materials: Modified urea–formaldehyde resin with cementInternational Journal of Mining Science and Technology, 2012
- Possible solutions for sludge dewatering in ChinaFrontiers of Environmental Science & Engineering in China, 2009
- The use of sewage sludge and marble residues in the manufacture of ceramic tile bodiesApplied Clay Science, 2009
- Optimization of drawbead design in sheet metal forming based on intelligent sampling by using response surface methodologyJournal of Materials Processing Technology, 2008
- Application of sewage sludge in the manufacturing of ceramic tile bodiesApplied Clay Science, 2005