A Two-Stage Machine Learning and Finite Element Framework for System Failure Analysis of Reinforced Concrete Flat-Slab Structures
Authors:
Open Access
- 1 January 2026
- journal article
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 148 (3) , 1-10
Abstract
Punching shear failure at a single slab–column joint can trigger rapid load redistribution and cascading damage in reinforced concrete flat-slab systems, making component-level reliability assessment insufficient for evaluating progressive-collapse risk. Moreover, direct Monte Carlo simulation (MCS) coupled with nonlinear finite element (FE) analysis is computationally prohibitive for rare-event system reliability problems involving multiple uncertainties. To address these challenges, this study proposes a two-stage machine learning–finite element (ML–FE) framework for system failure assessment of reinforced concrete flat-slab structures. In Stage I, an ML surrogate trained on 610 experimental slab–column joint tests predicts punching shear resistance and screens potentially critical realizations from a large MCS sample space. In Stage II, only the screened realizations are propagated into a nonlinear OpenSees model to simulate load redistribution, sequential joint failure, and system-level damage evolution. System reliability is then evaluated under three candidate failure criteria representing progressively more severe performance states, from initial local punching to widespread structural damage. The results show that the estimated system failure probability is strongly dependent on the adopted failure definition: local punching events frequently develop into moderate system damage, whereas only a smaller fraction progresses to severe widespread failure. For the largest Monte Carlo case, the Stage-I screening filtered approximately 99.94% of safe realizations and reduced the estimated computational time from about 26,000 h for direct MCS–FE analysis to approximately 15 h. The proposed framework contributes a computationally scalable link between experimentally informed component resistance and mechanics-based system response, enabling multi-level reliability assessment while also revealing characteristic failure-propagation paths and structural robustness of reinforced concrete flat-slab systems.Keywords
This publication has 49 references indexed in Scilit:
- EMCS-SVR: Hybrid efficient and accurate enhanced simulation approach coupled with adaptive SVR for structural reliability analysisComputer Methods in Applied Mechanics and Engineering, 2022
- Pre- and post-punching failure performances of flat slab-column joints with drop panels and shear studsEngineering Failure Analysis, 2022
- Post-punching failure mechanism and resistance of flat plate-column joints with in-plane constraintsEngineering Failure Analysis, 2022
- A preliminary analysis and discussion of the condominium building collapse in surfside, Florida, US, June 24, 2021Frontiers of Structural and Civil Engineering, 2021
- Punching Shear Strengths of RC Slab-Column Connections: Prediction and ReliabilityKSCE Journal of Civil Engineering, 2017
- Simplified reliability analysis of punching in reinforced concrete flat slab buildings under accidental actionsEngineering Structures, 2017
- Static and dynamic analysis of a reinforced concrete flat slab frame building for progressive collapseEngineering Structures, 2012
- Strain-based strength model for direct punching shear of interior slab–column connectionsEngineering Structures, 2011
- Progressive collapse of multi-storey buildings due to sudden column loss — Part I: Simplified assessment frameworkEngineering Structures, 2008
- Reliability of structural systems with correlated elementsApplied Mathematical Modelling, 1982