Three-body abrasive wear resistance of iron matrix composites reinforced with ceramic particles
Authors:
- 2 August 2013
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 228 (1) , 3-10
Abstract
Pure aluminum oxide (Al2O3), ZrO2 toughened Al2O3 (ZTA; 25–30% ZrO2), and ZTA (55–60% ZrO2) ceramic particles reinforced Cr25 matrix composites are successfully fabricated by the infiltration casting process. The volume fraction of ceramic particles in the composites is 47–55%. The interface structure between ceramic particles and the matrix was analyzed by digital probing microscopy and was found to be continuous mechanical bonding. The wear behavior of the composites was studied by a three-body abrasive wear tester. ZTA (55–60% ZrO2) reinforced Cr25 composite has excellent wear resistance which is approximately six times higher than that of the high chromium cast iron matrix. It is discovered that the wear mechanism of composites is micro-cutting and fatigue stripping. A correlation exists between the wear resistance of composites and the strength of ceramic particles.Keywords
This publication has 16 references indexed in Scilit:
- Damage tolerance andR-curve behavior of Al2O3–ZrO2–Nb multiphase composites with synergistic toughening mechanismJournal of Materials Research, 2008
- Solidification of high-Cr white cast iron–WC particle reinforced compositesMaterials Science and Engineering: A, 2005
- Ceramic–metal composites with an interpenetrating networkMaterials Chemistry and Physics, 2003
- Wear in relation to friction — a reviewWear, 2000
- Processing and properties of particulate reinforced steel matrix compositesMaterials Science and Engineering: A, 1998
- Transformation and Microcrack Toughening as Complementary Processes in ZrO 2 ‐Toughened Al 2 O 3Journal of the American Ceramic Society, 1986
- Strength‐Toughness Relations in Sintered and Isostatically Hot‐Pressed ZrO 2 ‐Toughened Al 2 O 3Journal of the American Ceramic Society, 1986
- Abrasive wear mechanisms and the grit size effectWear, 1979
- The wear of metals by hard abrasivesWear, 1967
- Effect of abrasive particle size on wearWear, 1965