A Self-Contained Startup Charging Circuit for Energy-Harvesting Batteryless IoT Devices
Open Access
- 18 December 2025
- journal article
- research article
- Published by MDPI AG in Journal of Low Power Electronics and Applications
- Vol. 15 (4) , 71
Abstract
This paper presents a self-contained startup charging circuit designed for energy-harvesting batteryless IoT devices. The proposed circuit consists of a current-biasing block, a current mirror, a reference voltage generator, and a comparator circuit. The current-biasing circuit drives the current mirror, which supplies the charging current to the energy storage element. Simultaneously, the reference voltage generator—also biased by the current source—produces a stable DC reference voltage. When the energy storage device (e.g., a supercapacitor) lacks sufficient charge, the comparator enables the charging path by activating the current-biasing and mirror circuits. Once adequate energy is stored, the comparator disables these circuits to prevent overcharging. This self-contained solution is intended to autonomously initialize and manage the cold-start charging process in energy-harvesting systems without relying on external controllers. This paper highlights the circuit architecture and validated performance, demonstrating a charging current of up to 27 mA, a reference voltage of 700 mV, and an operating range from 0.9 V to 1.8 V across a temperature range of −40 °C to 85 °C.Keywords
All Related Versions
Funding Information
- Department of Science and Technology
- XINYX DESIGN
This publication has 31 references indexed in Scilit:
- A 39 GHz Doherty-Like Power Amplifier With 22dBm Output Power and 21% Power-Added Efficiency at 6dB Power Back-OffIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2024
- Low-Loss and Compact Millimeter-Wave Silicon-Based Filters: Overview, New Developments in Silicon-on-Insulator Technology, and Future TrendsIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2023
- A Design of High Efficiency Non-Time Division Multiplexing Battery-less and Self-Powered Multi-Input Single-Inductor Single-Output Using 22nm FDSOI Technology2023
- Integrated Cold Start of a Boost Converter at 57 mV Using Cross-Coupled Complementary Charge Pumps and Ultra-Low-Voltage Ring OscillatorIEEE Journal of Solid-State Circuits, 2019
- An On-Chip Bandpass Filter Using a Broadside-Coupled Meander Line Resonator With a Defected-Ground StructureIEEE Electron Device Letters, 2017
- Fully Integrated Startup at 70 mV of Boost Converters for Thermoelectric Energy HarvestingIEEE Journal of Solid-State Circuits, 2016
- Low-voltage indoor energy harvesting using photovoltaic cell2016
- 1.2-V Supply, 100-nW, 1.09-V Bandgap and 0.7-V Supply, 52.5-nW, 0.55-V Subbandgap Reference Circuits for Nanowatt CMOS LSIsIEEE Journal of Solid-State Circuits, 2013
- A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup VoltageIEEE Journal of Solid-State Circuits, 2010
- Micropower energy harvestingSolid-State Electronics, 2009