Research of Catalytic Performance over Transition Metal Modified MnOx-CeOx/ACF Catalysts
Authors:
- 22 November 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 383-390, 1945-1950
Abstract
The catalyst of MnOx-CeOx/ACF prepared by impregnation method was used for low-temperature selective catalytic reduction (SCR) of NO with NH3, and more than 90% NO conversion was obtained at 230°C. Fe、Cu or V was used respectively to prepare transition metal modified MnOx-CeOx/ ACF catalysts which had lower catalytic activity than that over MnOx-CeOx/ACF. SEM, N2 adsorption and NH3-TPD were used to analyze the catalysts. The results showed that transition metal modified catalysts had a reduced surface area, pore volume and surface acidity. SO2 had a negative effect on SCR performance of the catalysts. Fe modified catalyst exhibited SO2 tolerance in the first 6h in the presence of 100ppm SO2. Thermal treatment in N2 at 350°C was used to regenerate the deactivated catalysts by SO2. The decomposition of ammonium salts recovered the catalytic activity to some extent. The sulfated active components in deactivated catalysts after the thermal treatment enhanced the surface acidity of the catalysts.Keywords
This publication has 10 references indexed in Scilit:
- Effect of SO2 on V2O5/ACF catalysts for NO reduction with NH3 at low temperatureCatalysis Communications, 2009
- Low-temperature selective catalytic reduction of NO with NH3 based on MnO x -CeO x /ACFNFrontiers of Chemical Engineering in China, 2008
- Experimental study on a low-temperature SCR catalyst based on MnO /TiO2 prepared by sol–gel methodJournal of Hazardous Materials, 2007
- MnO -CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperaturesApplied Catalysis B: Environment and Energy, 2004
- Low-temperature SCR of NOx with NH3 over activated carbon fiber composite-supported metal oxidesApplied Catalysis B: Environment and Energy, 2003
- Selective Catalytic Oxidation of Ammonia to Nitrogen over Fe2O3–TiO2 Prepared with a Sol–Gel MethodJournal of Catalysis, 2002
- Low-temperature SCR of NOx with NH3 over Nomex™ rejects-based activated carbon fibre composite-supported manganese oxidesApplied Catalysis B: Environment and Energy, 2001
- Low-temperature selective catalytic reduction of NOx by metal oxides supported on active carbon fibersApplied Catalysis A: General, 1998
- Deactivation by SO2 of MnOx/Al2O3 catalysts used for the selective catalytic reduction of NO with NH3 at low temperaturesApplied Catalysis B: Environment and Energy, 1998
- Deactivation of a vanadia-alumina catalyst for nitric oxide reduction by ammoniaIndustrial & Engineering Chemistry Product Research and Development, 1986