Effect of Resin System Parameters on Resin Transfer Molding of Vinyl Ester Based Composites—A Statistically Designed Study
Authors:
- 1 July 1995
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 34 (4) , 599-620
Abstract
Although the area of composites has advanced significantly over the past three decades, there is still a lack of understanding as to the coupling between materials and processing variables, especially as related to the use of resin systems in emerging processes such as resin transfer molding (RTM). As materials are tailored through the use of additives to resin systems, intricate fiber architectures, and the use of specific processing parameters, the need for a thorough understanding of the effect of minor variations in the materials system and the ultimate need for process control techniques increases. The current investigation is aimed at developing an understanding of variation in performance in three similar vinyl ester resin based composite systems as a function of mold release agent concentration, presence of a wetting/dispersion agent, and preform tool temperature. It is seen that the concentration of mold release agent has a significant influence on performance, which can be correlated with results of dynamic mechanical analysis tests. The importance of using statistically based studies to determine optimum settings and overall variation in performance is emphasized. This approach is favored over the use of an n[sgrave] approach, which gives the user a means of controlling quality based on postproduction control rather than through the selection of settings that are insensitive to variation in the quality of incoming material process changes. The achievement of quality through control of material and process variables is important not only for the cost-efficient production of composite parts but also for the fabrication of large parts such as would be needed for civil infrastructure applications (bridge decks, piers, etc.), where postproduction rejection would result in significant losses.Keywords
This publication has 5 references indexed in Scilit:
- Influence of test fluid on fabric permeability measurements and implications for processing of liquid moulded compositesJournal of Materials Science Letters, 1993
- Effect of material, process, and equipment variables on the performance of resin transfer moulded partsComposites Manufacturing, 1992
- Study of the adhesion of organic polymers to E-glassJournal of Materials Science Letters, 1989
- Adhesion of Graphite Fibers to Epoxy Matrices: II. The Effect of Fiber FinishThe Journal of Adhesion, 1983
- Adhesion of Graphite Fibers to Epoxy Matrices: I. The Role of Fiber Surface TreatmentThe Journal of Adhesion, 1983