Effect of 0.5 wt % Cu addition in Sn–3.5%Ag solder on the dissolution rate of Cu metallization
Authors:
- 2 December 2003
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 94 (12) , 7904-7909
Abstract
The dissolution of thin film under-bump-metallization (UBM) by molten solder has been one of the most serious processing problems in electronic packaging technology. Due to a higher melting temperature and a greater Sn content, a molten lead-free solder such as eutectic SnAg has a faster dissolution rate of thin film UBM than the eutectic SnPb. The work presented in this paper focuses on the role of 0.5 wt % Cu in the base Sn–3.5%Ag solder to reduce the dissolution of the Cu bond pad in ball grid array applications. We found that after 0.5 wt % Cu addition, the rate of dissolution of Cu in the molten Sn–3.5%Ag solder slows down dramatically. Systematic experimental work was carried out to understand the dissolution behavior of Cu by the molten Sn–3.5%Ag and Sn–3.5%Ag–0.5%Cu solders at 230–250 °C, for different time periods ranging from 1 to 10 min. From the curves of consumed Cu thickness, it was concluded that 0.5 wt % Cu addition actually reduces the concentration gradient at the Cu metallization/molten solder interface which reduces the driving force of dissolution. During the dissolution, excess Cu was found to precipitate out due to heterogeneous nucleation and growth of at the solder melt/oxide interface. In turn, more Cu can be dissolved again. This process continues with time and leads to more dissolution of Cu from the bond pad than the amount expected from the solubility limit, but it occurs at a slower rate for the molten Sn–3.5%Ag–0.5%Cu solder.
Keywords
This publication has 19 references indexed in Scilit:
- Six cases of reliability study of Pb-free solder joints in electronic packaging technologyMaterials Science and Engineering: R: Reports, 2002
- Morphological stability of solder reaction products in flip chip technologyJournal of Electronic Materials, 2001
- Wetting reaction of Sn-Ag based solder systems on Cu substrates plated with Au and/or Pd layerJournal of Electronic Materials, 2001
- Use of multicomponent phase diagrams for predicting phase evolution in solder/conductor systemsJournal of Electronic Materials, 2001
- Advances in lead-free electronics solderingCurrent Opinion in Solid State and Materials Science, 2001
- Lead-free Solders in MicroelectronicsMaterials Science and Engineering: R: Reports, 2000
- The local nominal composition-useful concept for microjoining and interconnection applicationsScripta Materialia, 1997
- Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripeningPhysical Review B, 1996
- Morphology of instability of the wetting tips of eutectic SnBi, eutectic SnPb, and pure Sn on CuJournal of Materials Research, 1995
- Metallurgy of low temperature Pb-free solders for electronic assemblyInternational Materials Reviews, 1995