Bacterial cellulose‐modified castor oil‐based polyurethane sponge for hexavalent chromium removal
- 25 July 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (38)
Abstract
Due to the multiple industrial applications of chromium compounds and their dangerous nature for the environment, the development of adsorbent materials has been investigated. In line with this reality, bacterial cellulose (BC) has become a potential filler in the polymeric matrix due to its ability to remove toxic metals; however, its performance is little explored. This research proposes a new approach for BC as a filler in castor oil‐based polyurethane, obtaining a sponge for Cr(VI) removal. The pure PU and PU + X%BC sponges (X stands for BC content between 5 and 20 wt%) were characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, optical microscopy, density, contact angle (CA), and thermogravimetric analysis. Sorption capacity and efficiency were evaluated as a function of the fiber content, with tests performed in function of contact time (2.5 min to 3 h) at 50 mg L−1. The BC fillers of the sponges increased the density and influenced the morphological, chemical structural, thermal, and sorption properties. Thus, the sponge (PU + 20%BC) presented the highest CA (104.4°) and the best sorption capacity and efficiency (4.3 mg g−1 and 43.2%). The sorption mechanism was well‐defined by isotherm models, presenting a maximum adsorption capacity of 23.5 mg g−1 and best fit (R2 = 0.989) with the Freundlich isotherm. The sponge is an efficient material for Cr (VI) removal and provided a promising insight into an adsorption mechanism study.Keywords
Funding Information
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (309614/2021‐0, 403934/2021‐4)
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2013/07276‐1, 2021/08296‐2, 2020/13703‐3)
This publication has 63 references indexed in Scilit:
- High bio-content polyurethane (PU) foam made from bio-polyol and cellulose nanocrystals (CNCs) via microwave liquefactionMaterials & Design, 2018
- Physical Characterization of Bacterial Cellulose Produced by Komagataeibacter medellinensis Using Food Supply Chain Waste and Agricultural By-Products as Alternative Low-Cost FeedstocksJournal of Polymers and the Environment, 2017
- In situ TEMPO surface functionalization of nanocellulose membranes for enhanced adsorption of metal ions from aqueous mediumRSC Advances, 2017
- Novel hyperbranched polyurethane resins for the removal of heavy metal ions from aqueous solutionProcess Safety and Environmental Protection, 2016
- Box-Behnken experimental design for chromium(VI) ions removal by bacterial cellulose-magnetite compositesInternational Journal of Biological Macromolecules, 2016
- Comparing Different Synthetic Talc as Fillers for Polyurethane NanocompositesMacromolecular Symposia, 2016
- Adsorption kinetics and optimum conditions for Cr(VI) removal by activated carbon prepared from luffa spongeDesalination and Water Treatment, 2016
- Monolayer and multilayer adsorption isotherm models for sorption from aqueous mediaKorean Journal of Chemical Engineering, 2015
- Characterization of Functionalized Polyurethane Foam for Lead Ion Removal from WaterInternational Journal of Polymer Science, 2014
- Synthesis and characterization of polyurethane composites of wood waste and polyols from chemically recycled petComposites Part A: Applied Science and Manufacturing, 2011