Influence of hydrogen levels on porosity and mechanical properties of Mg alloy castings

Authors:
  • SWS. S. Wu
    S. S. Wu
  • SXS. X. Xu
    S. X. Xu
  • YFY. Fukuda
    Y. Fukuda
  • HNH. Nakae
    H. Nakae

Abstract
The effects of hydrogen levels on microstructure of porosity and mechanical properties of magnesium alloy castings were investigated. The hydrogen content of AZ91 alloy melt under Ar+HFC-134a mixed gas protection was 103 cm3 kg−1, which was less than that of 139 cm3 kg−1 under flux protection, therefore the effect of gas protection was better. The porosity ratio in microstructure of castings melted under gas protection was 1˙8%, which was also less than that of 2˙6% under flux protection. The hydrogen content of melt under flux protection and degassed with Ar gas was 70 cm3 kg−1, and the corresponding porosity ratio in microstructure of castings was only 0˙6%. The density of the samples was increased with decreasing hydrogen content. The tensile strength of AZ91 alloy casting sample under flux protection and degassed with Ar gas was 21% higher than that of undegassed one, and the elongation was also 50% higher.