Enhanced nanogenerator by embedding lead-free double perovskite Cs2AgBiBr6 in polymer matrix for hybrid energy harvesting
- 27 November 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (1) , 207-220
Abstract
Mechanical energy harvesters fabricated with halide perovskites display excellent electrical output because of their prominent permittivity. An all-inorganic lead-free double perovskite, Cs2AgBiBr6 (CABB), with competitive performance, excellent environmental stability and non-toxicity can break the confines of practical unavailability. CABB microcrystals, which are effective nucleating agents and dielectric fillers, are embedded into a polyvinylidene-fluoride (PVDF)-matrix as efficient electron-acceptors to induce electro-active PVDF β-phase formation and enhance the composite dielectric constant, which contributes to notable hybrid electric outputs. CABB–PVDF hybrid nanogenerators with the optimal CABB concentration of 20 wt% possess triboelectric and piezoelectric effects, with a nanogenerator with a 1.2 cm × 1.2 cm effective contact area and 70 μm film thickness exhibiting a unique response with an open-circuit voltage of 126 V and a short-current density of 4.67 mA m−2 under a 0.5 Hz mechanical frequency and 4 cm s−1 motion speed. An identical device achieves the highest output power density of 0.39 W m−2 at 8 Hz and 0.64 m s−1, which could light up at least 86 commercial LEDs using a 1 μF capacitor and power small electronic devices such as a timer using 22 μF. The corresponding force sensing is achieved with a different distribution of external forces using a 10 wt% CABB–PVDF composite film. This functional composite maintains its stability and charge retention capacity for effective application in various environmental conditions.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFE0105900, 2022YFE0139100)
- National Natural Science Foundation of China (62175028, 51879042, 61674029)
- Higher Education Discipline Innovation Project (BP0719013)
This publication has 57 references indexed in Scilit:
- Ni3C-Decorated MAPbI3 as Visible-Light Photocatalyst for H2 Evolution from HI SplittingACS Catalysis, 2019
- A strategy for design of non-percolative composites with stable giant dielectric constants and high energy densitiesNano Energy, 2019
- Remarkable Output Power Density Enhancement of Triboelectric Nanogenerators via Polarized Ferroelectric Polymers and Bulk MoS2 CompositesACS Nano, 2019
- Triboelectric Nanogenerator: A Foundation of the Energy for the New EraAdvanced Energy Materials, 2018
- Enhanced output performance of a flexible piezoelectric energy harvester based on stable MAPbI3-PVDF composite filmsNano Energy, 2018
- Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limitNature Photonics, 2017
- An Approach to Design Highly Durable Piezoelectric Nanogenerator Based on Self‐Poled PVDF/AlO‐rGO Flexible Nanocomposite with High Power Density and Energy Conversion EfficiencyAdvanced Energy Materials, 2016
- Dynamic Behavior of the Triboelectric Charges and Structural Optimization of the Friction Layer for a Triboelectric NanogeneratorACS Nano, 2016
- A Bismuth-Halide Double Perovskite with Long Carrier Recombination Lifetime for Photovoltaic ApplicationsJournal of the American Chemical Society, 2016
- High performance triboelectric nanogenerators based on large-scale mass-fabrication technologiesNano Energy, 2015