Electric Fields Obviate Constrained Sintering
Authors:
- 24 July 2014
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 97 (10) , 3103-3109
Abstract
The phenomenon of constrained sintering, where large rigid inclusions of alumina have been shown to significantly reduce the rate of sintering of titania [Bordia and Raj (1988) J. Am. Ceram. Soc. 71, 302–310], is shown to subside nearly completely during flash sintering carried out under modest electrical fields. The result is explained by a different mechanism for volumetric and shear deformation under electric fields. It is proposed that vacancy and interstitials generated within the grains migrate to grain boundaries and pores to produce both volumetric and shear strain at equal rates, since, in this way, the diffusion distance for both modes of deformation becomes the same. In conventional sintering, where transport occurs from one interface to another, the diffusion distance for shear is twice as far as for densification, which retards sintering should it become controlled by shear deformation, as seen in constrained sintering.Keywords
Funding Information
- Basic Science Division of the Department of Energy (DE-FG02-07ER46403)
This publication has 14 references indexed in Scilit:
- Flash Sintering of Anode–Electrolyte Multilayers for SOFC ApplicationsJournal of the American Ceramic Society, 2013
- Joule heating during flash-sinteringJournal of the European Ceramic Society, 2012
- Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-dopingJournal of the European Ceramic Society, 2011
- Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in CeramicsJournal of the American Ceramic Society, 2011
- Flash Sintering of Nanograin Zirconia in <5 s at 850°CJournal of the American Ceramic Society, 2010
- Enhanced Sintering Rate of Zirconia (3Y‐TZP) Through the Effect of a Weak dc Electric Field on Grain GrowthJournal of the American Ceramic Society, 2010
- Combustion synthesis of aluminium titanateJournal of the European Ceramic Society, 1998
- Aluminium titanate-titania ceramics synthesized by sintering and hot pressingCeramics International, 1989
- Sintering of TiO 2 –Al 2 O 3 Composites: A Model Experimental InvestigationJournal of the American Ceramic Society, 1988
- Sintering Behavior of Ceramic Films Constrained by a Rigid SubstrateJournal of the American Ceramic Society, 1985