Large area roll-to-roll printed semiconducting carbon nanotube thin films for flexible carbon-based electronics
Open Access
- 27 January 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (11) , 5317-5326
Abstract
A universal roll-to-roll (R2R) printing approach was developed to construct large area (8 cm × 14 cm) semiconducting single-walled carbon nanotube (sc-SWCNT) thin films on flexible substrates (such as polyethylene terephthalate (PET), paper, and Al foils) at a printing speed of 8 m min−1 using highly concentrated sc-SWCNT inks and crosslinked poly-4-vinylphenol (c-PVP) as the adhesion layer. Bottom-gated and top-gated flexible printed p-type TFTs based on R2R printed sc-SWCNT thin films exhibited good electrical properties with a carrier mobility of ∼11.9 cm2 V−1 s−1, Ion/Ioff ratios of ∼106, small hysteresis, and a subthreshold swing (SS) of 70–80 mV dec−1 at low gate operating voltages (±1 V), and excellent mechanical flexibility. Furthermore, the flexible printed complementary metal oxide semiconductor (CMOS) inverters demonstrated rail-to-rail voltage output characteristics under an operating voltage as low as VDD = −0.2 V, a voltage gain of 10.8 at VDD = −0.8 V, and power consumption as low as 0.056 nW at VDD = −0.2 V. To the best of our knowledge, the electrical properties of the printed SWCNT TFTs (such as Ion/Ioff ratio, mobility, operating voltage, and mechanical flexibility) and printed CMOS inverters based on the R2R printed sc-SWCNT active layer in this work are excellent compared to those of R2R printed SWCNT TFTs reported in the literature. Consequently, the universal R2R printing method reported in this work could promote the development of fully printed low-cost, large-area, high-output, and flexible carbon-based electronics.Keywords
Funding Information
- National Natural Science Foundation of China (62274174)
- National Key Research and Development Program of China (2020YFA0714700)
This publication has 56 references indexed in Scilit:
- Ultrahigh Carrier Mobility Achieved in Photoresponsive Hybrid Perovskite Films via Coupling with Single‐Walled Carbon NanotubesAdvanced Materials, 2017
- Stretchable Active Matrix Inorganic Light‐Emitting Diode Display Enabled by Overlay‐Aligned Roll‐Transfer PrintingAdvanced Functional Materials, 2017
- Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet PrintingACS Applied Materials & Interfaces, 2016
- Influence of Polymer Electronics on Selective Dispersion of Single‐Walled Carbon NanotubesChemistry – A European Journal, 2016
- Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysisNature, 2016
- Charge Transfer Dynamics between Carbon Nanotubes and Hybrid Organic Metal Halide Perovskite FilmsThe Journal of Physical Chemistry Letters, 2016
- A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensorsScientific Reports, 2015
- Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing systemScientific Reports, 2015
- Low cost and large-area fabrication of self-cleaning coating on polymeric surface based on electroless-plating-like solution deposition approachRSC Advances, 2015
- Design of Surfactant–Substrate Interactions for Roll-to-Roll Assembly of Carbon Nanotubes for Thin-Film TransistorsJournal of the American Chemical Society, 2014