Numerical and Experimental Analysis of the Mode I Interlaminar Fracture Toughness in Multidirectional 3D-Printed Thermoplastic Composites Reinforced with Continuous Carbon Fiber
Open Access
Abstract
It is well known that the use of continuous reinforcing fibers can largely improve the typical low in-plane mechanical properties of 3D-printed parts. However, there is very limited research on the characterization of the interlaminar fracture toughness of 3D-printed composites. In this study, we investigated the feasibility of determining the mode I interlaminar fracture toughness of 3D-printed cFRP composites with multidirectional interfaces. First, elastic calculations and different FE simulations of Double Cantilever Beam (DCB) specimens (using cohesive elements for the delamination, in addition to an intralaminar ply failure criterion) were carried out to choose the best interface orientations and laminate configurations. The objective was to ensure a smooth and stable propagation of the interlaminar crack, while preventing asymmetrical delamination growth and plane migration, also known as crack jumping. Then, the best three specimen configurations were manufactured and tested experimentally to validate the simulation methodology. The experimental results confirmed that, with the appropriate stacking sequence for the specimen arms, it is possible to characterize the interlaminar fracture toughness in multidirectional 3D-printed composites under mode I. The experimental results also show that both initiation and propagation values of the mode I fracture toughness depend on the interface angles, although a clear tendency could not be established.Keywords
Funding Information
- the Spanish Ministry of Science, Innovation, and Universities (MCIU) (RTI2018-094435-B-C32, REQ2021_A_15)
- the Spanish ‘Ministerio de Universidades’ (RTI2018-094435-B-C32, REQ2021_A_15)
This publication has 53 references indexed in Scilit:
- A review of recent developments in natural fibre composites and their mechanical performanceComposites Part A: Applied Science and Manufacturing, 2016
- Characterization of crack propagation in mode I delamination of multidirectional CFRP laminatesComposites Science and Technology, 2012
- Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminatesComposites Science and Technology, 2011
- Delamination of multidirectional composite laminates at 0°/θ° ply interfacesEngineering Fracture Mechanics, 2006
- A damage model for the simulation of delamination in advanced composites under variable-mode loadingMechanics of Materials, 2006
- Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth directionComposites Science and Technology, 2004
- Effects of Moisture Conditioning Methods on Mechanical Properties of Injection Molded Nylon 6Journal of Reinforced Plastics and Composites, 2004
- Double cantilever beam testing of multidirectional laminatesComposites Part A: Applied Science and Manufacturing, 2003
- Three-dimensional analysis of center-delaminated unidirectional and multidirectional single-leg bending specimensComposites Science and Technology, 1995
- Effects of moisture on thermal and mechanical properties of nylon‐6,6Advances in Polymer Technology, 1989