A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation
- 25 July 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-11
Abstract
The performance of vacuum circuit breakers (VCBs) in the interruption and protection of an electric power system is highly dependent on the contact conditions; thus, the assessment of the contact conditions is essential. The field emission current has been recognized as an effective parameter with which to investigate the contact conditions both qualitatively and quantitatively. The traditional measurement method that uses the field emission current to determine the contact conditions is performed under ac voltage and requires the VCB to be dismantled, which limits the application of this method. The objective of this study is to develop a new measurement method for the contact conditions in a VCB with the field emission current during the closing operation under dc voltage. The new measurement method does not require the VCB to be dismantled and can simplify the processing of experimental data. Then, the new measurement method is applied to investigate the contact conditions during capacitive switching. The obtained result shows that the field enhancement factor $\beta $ of the contact surface oscillates up and down during the capacitive experiment, which can verify the conditioning and deconditioning effects of the inrush current on contact surfaces.Keywords
Funding Information
- National Natural Science Foundation of China (51937009, 51877166)
- Natural Science Foundation of NingXia Hui Autonomous Region (2021AAC03501)
This publication has 30 references indexed in Scilit:
- Asymmetrical AC field emission current characteristics of vacuum interrupters subjected to inrush currentIEEE Transactions on Dielectrics and Electrical Insulation, 2016
- Resistance increase of vacuum interrupters due to high-current interruptions2014
- Capacitive switching of vacuum interrupters and inrush currentsIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Electrical Switching Life of Vacuum Circuit Breaker Interrupters2006
- Switching of capacitive currents and the correlation of restrike and pre-ignition behaviorIEEE Transactions on Dielectrics and Electrical Insulation, 2006
- An approach for intelligent detection and fault diagnosis of vacuum circuit breakersIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- Influence of aging effect on behavior of field emission sites in a broad‐area vacuum gapElectrical Engineering in Japan, 2001
- Erosion and resistance characteristics of AgW and AgC contactsIEEE Transactions on Components and Packaging Technologies, 1999
- Capacitor switching capability of vacuum interrupter with CuW contact materialIEEE Transactions on Power Delivery, 1995
- Values of Fowler-Nordheim field emission functions: v(y), t(y), and s(y)Journal of the Franklin Institute, 1966