Experimental investigation of the two-phase local heat transfer coefficients for condensation of R134a in a micro-structured plate heat exchanger
Open Access
- 5 June 2021
- journal article
- research article
- Published by Springer Nature in Heat and Mass Transfer
- Vol. 58 (1) , 1-18
Abstract
Plate heat exchangers are widely used for two-phase heat transfer in the industrial applications, and recently more attention has been paid to the plate heat exchangers with enhanced surface due to their better heat transfer performance. In this paper, the local condensation heat transfer coefficients are studied using R134a in a micro-structured plate heat exchanger. In order to obtain a more accurate prediction model, a series of measurements are conducted under various operating conditions. The mass flux of R134a varied from 47 kg/m2s to 77 kg/m2s, the saturation pressure in the condenser ranged from 6.32 bar to 8.95 bar, and the value of the heat flux was between 13 kW/m2 and 22 kW/m2. The local two-phase Nusselt number increases with the increase of the mass flux. As the saturation pressure increases, the local two-phase Nusselt number increase at the beginning of the condensation and decrease at the end of the condensation. However, the effect of heat flux on local heat transfer is irregular, due to the interaction of these parameters in the experiment. Comparing with the unstructured plate heat exchanger, R134a condenses faster at the beginning of the process in the micro-sturctured plate heat exchanger, and the local heat transfer performs better when the vapor quality is lower. Combing with the phenomenon that the overall heat flux in micro-structured plate is larger under the same working conditions, it shows that the overall heat transfer of the micro-structured plate is improved, but the local heat transfer uprades only at lower vapor qualities. A new correlation is developed, it predicts all the experimental data within the root mean square error 10%, and a new correlation for the waterside is suggested as well.Keywords
Funding Information
- Gottfried Wilhelm Leibniz Universität Hannover
This publication has 24 references indexed in Scilit:
- Partial condensation of R407C and R410A refrigerants inside a plate heat exchangerExperimental Thermal and Fluid Science, 2012
- Refrigerant R134a condensation heat transfer and pressure drop inside a small brazed plate heat exchangerInternational Journal of Refrigeration, 2008
- Assessment of boiling and condensation heat transfer correlations in the modelling of plate heat exchangersInternational Journal of Refrigeration, 2007
- HEAT TRANSFER COEFFICIENTS AND PRESSURE DROP DURING HFC REFRIGERANTS VAPORISATION INSIDE A BRAZED PLATE HEAT EXCHANGER2006
- Condensation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchangerInternational Journal of Heat and Mass Transfer, 2005
- Experimental heat transfer coefficients during refrigerant vaporisation and condensation inside herringbone-type plate heat exchangers with enhanced surfacesInternational Journal of Heat and Mass Transfer, 2004
- Condensation Heat Transfer and Pressure Drop of Brazed Plate Heat Exchangers Using Refrigerant R-134aJournal of Enhanced Heat Transfer, 2004
- Condensation of Pure and Mixture of Hydrocarbons in a Compact Heat Exchanger: Experiments and ModellingHeat Transfer Engineering, 2002
- Condensation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchangerInternational Journal of Heat and Mass Transfer, 1999
- A general correlation for heat transfer during film condensation inside pipesInternational Journal of Heat and Mass Transfer, 1979