Fabrication optimization of polyethersulfone adsorptive mixed matrix membrane for enhanced dynamic methylene blue removal: Response surface methodology approach
- 20 February 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (4) , 1858-1876
Abstract
In the present study, the polyethersulfone (PES)/graphene oxide (GO)/polyethylene glycol 200 (PEG‐200) adsorptive mixed matrix membranes (AMMMs) were fabricated using a non‐solvent induced phase inversion method. According to the design of experiments using response surface methodology (RSM), PES concentration (15, 17.5, and 20%), PEG‐200 concentration as a pore former additive (0.5, 2.5, and 4.5%), and GO nanosheet loading percent (0, 0.5, and 1%) were varied during fabrication. A green solvent, dimethyl sulfoxide, was used as an alternative to conventional solvents, while it exhibited better membrane performance. Methylene blue (MB) removal was optimized in PES AMMM synthesis using RSM. Attenuated total reflectance Fourier transform infrared spectroscope confirmed the presence of GO functional groups in the optimum membrane. Scanning electron microscopy analysis revealed the optimum membrane was thicker than the neat membrane and atomic force microscopy analysis demonstrated higher surface roughness. The membranes hydrophilicity increased, with a decrease in water contact angle from 61.1 ± 0.2° (neat PES) to 54.4 ± 0.9° (optimal membrane). Pure water flux of 524.8 L m−2 h−1 and MB rejection of 97.46% were obtained for the optimum membrane. Furthermore, the optimum PES AMMM demonstrated a greater dynamic adsorption capacity in comparison to the unmodified PES membrane.Highlights: The optimization of the polyethersulfone (PES) adsorptive mixed matrix membranes (AMMM) for methylene blue removal was performed utilizing the response surface methodology. The calculation of the dynamic adsorption capacity (DAC) was performed through the breakthrough curves. The integration of graphene oxide into the AMMM resulted in an enhanced DAC of the AMMM. The PES AMMM performance is based on Donnan electrostatic exclusion.Keywords
Funding Information
- Iran National Science Foundation (96008182)
This publication has 49 references indexed in Scilit:
- Investigating the effect of zirconium‐based and titanium‐based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis applicationPolymer Engineering & Science, 2023
- Synthesis and characterization of PES/PSF/PEG by immersion precipitation for Mediterranean seawater desalination by FO membranePolymer Engineering & Science, 2022
- Direct membrane filtration (DMF) of municipal wastewater by mixed matrix membranes (MMMs) filled with graphene oxide (GO): Towards a circular sanitation modelChemical Engineering Journal, 2022
- Significance of thermodynamics and rheological characteristics of dope solutions on the morphological evolution of polyethersulfone ultrafiltration membranesPolymer Engineering & Science, 2020
- Antifouling performance enhancement of polyethersulfone ultrafiltration membrane through increasing charge‐loading capacity over Prussian blue nanoparticlesJournal of Applied Polymer Science, 2020
- Recent advances in adsorptive membranes for removal of harmful cationsJournal of Applied Polymer Science, 2019
- Mixed Matrix PVDF/Graphene and Composite‐Skin PVDF/Graphene Oxide Membranes Applied in Membrane DistillationPolymer Engineering & Science, 2018
- Mixed matrix membranes of H‐ZSM5‐loaded poly(vinyl alcohol) used in pervaporation dehydration of alcohols: Influence of silica/alumina ratioPolymer Engineering & Science, 2013
- Polyethersulfone enwrapped graphene oxide porous particles for water treatmentChemical Engineering Journal, 2013
- Hydrophilic microporous PES membranes prepared by PES/PEG/DMAc casting solutionsJournal of Applied Polymer Science, 2007