A Low-Profile Wideband Circularly Polarized Crossed-Dipole Antenna

Authors:
Publisher website
Google Scholar
Abstract
A low-profile crossed dipole antenna with wide bandwidth is investigated in this letter. The double-sided printing crossed dipoles consisting of four-stepped rectangular patches are fed by a pair of vacant-quarter printed rings, generating circularly polarized radiation. Two adjacent axial-ratio (AR) passbands with AR <; 3 dB are generated due to the stepped rectangular patches, and they are merged together by adding an additional dielectric slab above the ground plane, resulting in a very wide AR bandwidth. Also, an irregular ground plane is used for the antenna, which can desirably enhance the boresight gain without involving high-profile cavity. To verify the feasibility of the proposed design, a prototype operating at C-band has been fabricated and measured. Reasonable agreement between the simulated and measured results is obtained. The prototype has a low profile of 0.13 λ0 (in terms of the center frequency of passband), a 10-dB impedance bandwidth of 66.9%, a 3-dB AR bandwidth of 55.1%, and an average gain of approximately 10.4 dBic within passband.
Funding Information
  • Guangdong Natural Science Funds
  • Distinguished Young Scholars (2016A030306007)
  • Pearl River Nova Program of Guangzhou (201506010005)
  • Open Project of the State Key Laboratory of Millimeter Waves (K201512)

This publication has 8 references indexed in Scilit: